The 7 Best Food Trailer Water Tanks (2022 reviews)

If you want nothing but a tank that is suitable, this Class A Customs Gal Tank is certainly a right investment. The class a customs gal tank is open do not over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads. Mounting & bracing place the tank on a level surface and brace to prevent the tank from moving during transit. This is a pressurized connection and will cause the tank to explode, causing damage.

The tank is rust resistant and it is made from nsf approved materials. Finally, the class a customs gal tank made in a warehouse cleans each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.

Almost all customers found that the tank would work but watch the weight sitting on it. Also, they also found that the tank is designed for stock fresh water tank set-up using a fill dish. In addition, they also found that the tank made in USA class a customs manufactures these tanks and is located in Elkhart, Indiana.

Customers say that getting a water pumps for food truck, along with tank is useful.

Top Customer Quotes:

This is priced right and it is designed for a great price.
This is part of the manufacturing process.
This can be used with 1.5" gray fitting and fill dish.
This is great as backup water for dry camping.

Recpro Food Trailer Water Tank

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate tank. The Recpro Food Trailer Water Tank is exactly that - it's a simple tank that hits all the right notes. The recpro food trailer water tank is sturdy and it works perfectly. The Manufacturer says: Our rapid delivery times and a wide selection of aftermarket luxury furniture, and rv parts set us apart from our competitors. Moreover, it is contaminate free, is black and it would be perfect with fast shipping. Above all, the recpro food trailer water tank allows for good size, is made for water supply for showers and it keeps water fresh.

Almost all customers opine that the tank can be used as a boat water tank. Also, a few also found that the tanks are replacing the 42 gallon tank. Further, they strongly agree that the tank is full of bits of plastic.

Top Customer Quotes:

This will help the vehicle 's stability.
This is made by Laventure products Elkhart, Indiana, United States.
This is easy to match up from home depot or Lowe’s.
This is unrelated to the question asked.

Class A Customs Food Trailer Water Tank

Buy on Amazon

The class is a custom food trailer. water tank that is suitable and reliable and fits well with your daily purpose. The class a custom food trailerwater tank is open do not over-tighten fitting damage will occur, Use plastic connecting fittings as metal will damage threads. 39 12 longest length (not including fittings) x 13 x 18 - tank can sit on any side. This is a pressurized connection and will cause the tank to explode, causing damage.

The tank is great for water tank measurements and it is made from nsf approved materials. Moreover, the tanks made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process. Most importantly, the Class A Customs Food Trailer Water Tank is recommended to use a fill dish or other gravity process.

Almost all customers quickly discovered that the tank is made with nsf international nsf/ansi std 61 approved medium density polyethylene (mdpe) resin with uv-8 stabilization. In addition, they strongly agree that the tanks are either a sensor for water level or for the water pump. Further, they say that this tank has both 1.5 " and 1/2 " holes with female threads.

Customers discovered that getting a food trailer water tank, along with tank is useful.

Why We Like This:

Rotate tank to change height or width average thickness 7/32” +/- please view photos.
This is drinking water safe and it is made with fast shipping.
The tank must be vented, allowing air in and out during use.

RELATED: Best Trailer Water Hoses

Recpro Old Tank

Buy on Amazon

The Recpro Old Tank is satisfactory and appropriate and fits well with your regular use. The old tank is much more, is sturdy and it looks great. Make sure this fits by entering your model number. Also, it fits perfectly and it works perfectly.

Most importantly, the recpro old tank is built to standards specified by iapmo (international association of plumbing and mechanical officials) and the Canadian standards association.

Most customers opine that the tank is mounted with existing metal brackets. In addition, they also found that the tank will fix the entire problem in 20 minutes at a cost of $100 for materials and equipment. In addition, a few say that the questioner does n't intend to use the tank in a camper / rv. Therefore, buyers were eager to recommend it to friends and families.

Top Customer Quotes:

This is great for perfect size and it is designed for exact replacement.
The tank has standard fittings and the sensors all work fine.
This is designed to be mounted flat.
Blow-molded hdpe tanks are an integral component of all recreational vehicles.

A.A Food Trailer Water Tank

Buy on Amazon

The A.A Food Trailer Water Tank is suitable and reliable and fits well with your daily use. The a.a food trailer watertank features make them ideal for replacement or oem installation on rvs, horse trailers or marine products. Verify requirements on fresh water tank, gray water tank, fittings, drainage, and mounting placement. These rotational molded fresh water tanks are made from a high quality durable polyethylene material. Lastly, the a.a foodtrailer water tank comes with (1) 1.25" water fill inlet and (3) 3/8" npt connections.

One customer says - "The vent must remain open to allow air into the tank as the water is removed, and allow the air to escape the tank as it is filled. ". Most buyers quickly discovered that the tank can be rotated 90 degrees from what is shown in the picture. In short, many customers have used the American food trailerwater tank for more than a few months without any problems, and it shows no sign of giving up.

Why We Like This:

One piece seamless construction - no seams to burst.
This 16 gallon watertank measures 24" x 15" x 10" (not including fittings).
Lot of satisfied buyers.

Classacustoms Food Trailer Water Tank

Buy on Amazon

The Classacustoms Food Trailer Water Tank is suitable and reliable and fits well with your daily use. The classacustoms foodtrailer water tank is made with nsf international nsfansi std 61 approved medium density polyethylene (mdpe) resin with uv-8 stabilization. Cutting or modifying the tank in any way voids any/all warranty using the tank for any purpose other than fresh/gray water storage voids any/all warranty food vendors. You must verify requirements with the health department where an inspection will be made. The tank and fittings are both made out of this material.

Above all, the classacustoms food trailer water tank made in a warehouse, wiped with a damp cloth to remove surface dust or scuffs.

Almost all buyers found that the tank is advisable to use a larger tank for the gray water so you don’t overfill it. With no doubts, this tank passed the test and had very satisfied buyers eager to share their experience.

Customers discovered that getting a water heaters with tank and water pumps for food truck, with this tank made their life much easier.

Why We Like This:

Place the tank on a level surface and brace to prevent the tank from moving during transit.
This is resistant to stain and it is rust resistant.
The Tanks must be vented allowing air in and out when in use.
Have a certified technician install all parts to prevent product damage and personal injury.

Classacustoms Mounting Bracing Place Tank

Buy on Amazon

Classacustoms has been making great tanks for years, thanks to a combination of clever design and appropriate materials. The Classacustoms Mounting Bracing Place Tank made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process. Mounting & bracing place the tank on a level surface and brace to prevent the tank from moving during transit. This is a pressurized connection and will cause the tank to explode, causing damage.

Above all, the classacustoms mounting bracing tank is open do not over-tighten fitting damage will occur, Use plastic connecting fittings as metal will damage threads.

Almost all buyers agree that the tank is made from good quality plastic.

Few customers bought water pumps for food truck and water heaters with tank, along with the tank.

Why We Like This:

It is recommended to use a fill dish or other gravity process.
The Tanks must be vented allowing air in and out when in use.
Measurements 42 x 14 x 18 -tank can sit on any side.
Rotate tank to change height or width average thickness 7/32” +/- please view photos.