We consider a homemade ball joint separator to be a worthy investment in the long run. In the following post, we will help you to select the best homemade ball joint separators.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Gearwrench Homemade Ball Joint Separator READ REVIEW

Best For Heavy Duty: Buy: Oemtools Homemade Ball Joint Separator READ REVIEW

Best For Fast Service: Buy: Shankly Homemade Ball Joint Separator READ REVIEW

Best For Low Quality: Buy: Orion Motor Tech Homemade Ball Joint Separator READ REVIEW

Best For Worth The Money: Buy: Neiko Homemade Ball Joint Separator READ REVIEW

Best For Lower Ball: Buy: Atp Homemade Ball Joint Separator READ REVIEW

Best For Light Trucks: Buy: Atp Technic Homemade Ball Joint Separator READ REVIEW

Best For Customer Service: Buy: Ares Homemade Ball Joint Separator READ REVIEW

Best For Easy Storage: Buy: Dasbet Homemade Ball Joint Separator READ REVIEW

Best For Control Arms: Buy: A Abigail Homemade Ball Joint Separator READ REVIEW

Best For Ball Joint Splitter: Buy: Tommars Homemade Ball Joint Separator READ REVIEW

Best Heavy Duty Design: Buy: Abn Homemade Ball Joint Separator READ REVIEW

Best Overall: Gearwrench Homemade Ball Joint Separator

Buy on Amazon

The Gearwrench Homemade Ball Joint Separator is the best long-standing separator on the market today. The gearwrench homemade ball joint separator is made with nice threads, is crafted with excellent quality and it is highly recommend. Make sure this fits by entering your model number. Also, it works as intended, is suitable for most cars and it is worth the money.

Lastly, the gearwrench homemade ball joint separator has used the ball joint and it is great for top quality.

Most customers opine that the separator will work fine for smaller, less than heavy - duty suspension systems. Moreover, they strongly agree that the separator is perfect for removing almost years old tie-rods and steering stabilizer on a 1999 jeep xj. Moreover, a few also found that the separator works well with cars and mid - size trucks.

• This is easy to use and makes quick work of the job.
• This includes the vast majority of ball joints and tie rod ends.
• This was used to replace tie rods on the Honda Odyssey in 2004 and was successful.
• This is easy to use, takes the frustration of swinging at a pickle fork.

Best For Heavy Duty: Oemtools Homemade Ball Joint Separator

Buy on Amazon

We would, of course, be remiss if we didn't mention Oemtools Homemade Ball Joint Separator for daily use. The oemtools homemade ball joint separator is great for customer service, It has less damage and has a heavy - duty design. . In addition, the separator worked perfectly and it was worth the money.

Lastly, the oemtools homemade ball joint separator works as advertised, It was bought again and has a professional design.

Almost all customers opine that the separator will separate and not damage the boot. And, they say that the separator works well on both accord and civic to release the drive axle and tie rod end connection. In addition, they strongly agree that this tool is awesome and makes the job really easy. Overall, the tone of buyers is very positive and we believe that the separator suits the purpose.

• This is a great looking tool in a decent box.
• This works well, but needs better qc.
• This will break free ball joints that are stuck, no problem.
• This will not work on gear box tie rods end.

Best For Fast Service: Shankly Homemade Ball Joint Separator

Buy on Amazon

We would, of course, be remiss if we didn't mention Shankly Homemade Ball Joint Separator for daily purpose. The shankly homemade ball joint separator features 3 pickle fork types. Make sure this fits by entering your model number. In addition, this works as intended, is best for fast service and it is used for heavy - duty use.

The separator worked perfectly, is good for a handy storage case and it works well. Most importantly, the shankly homemade ball joint separator features extra long handles to assist with maneuverability and to effectively deal with difficult angles.

Most customers find that the separator comes with a storage case and does the job they need too. Moreover, a few also found that the separator is easy to keep track of the tools. In short, many buyers have used the separator for more than a few months without any issues, and it shows no sign of giving up.

• This is used to separate the tierods, idler, pitman and balljoints.
• This is crafted with excellent quality and it comes with sturdy tools.
• This is so nice when they meet the deadline.
• This is made for the passenger side and it is great for the money.

Best For Low Quality: Orion Motor Tech Homemade Ball Joint Separator

Buy on Amazon

Not everyone likes to purchase a separators for their daily usage, but the Orion Motor Tech Homemade Ball Joint Separator would be an anomoly. The orion motor tech homemade ball joint separator is much more, It is very nice and has a handle design. The manufacturer says: Because to perform your best, you deserve the best, That’s our orion motor technology promise. The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear - wheel - drive vehicles, import vehicles, and light trucks.

The separator has hardened alloy construction, is great for customer service and it is good for light pickup trucks. And, it is crafted with excellent quality and it lasts longer. Most importantly, the orion motor tech homemade ball joint separator is best for mid-size cars, It is perfect for great quality and has a special design.

Most customers agree that the separator is able to get the job done with no issues. Further, they strongly agree that the separator can be used on 69 cougar pitman arm. Also, a few say that the threads of the removal tool started to deform instead of getting the joint to release. In conclusion, for most customers, it was just what they wanted.

• This is great for pushing, pulling almost any ball joint, even tie rod ends.
• These fit your car for whatever you need to separate.
• This is perfect on the 1996 k1500 suburban front end.
• This comes with great tools and it would be perfect with fast shipping.

Best For Worth The Money: Neiko Homemade Ball Joint Separator

Buy on Amazon

If you often find yourself confused about convenient and suitable separator,sss Neiko Homemade Ball Joint Separator should be your first option for buying. The neiko homemade ball joint separator comes in a blow molded plastic case to keep pickle forks organized. Make sure this fits by entering your model number. The ball joint separator is used for separating the ball joint from the spindle support arm on front wheel drive vehicles, both domestic and import.

Above all, the neiko homemade ball joint separator is used for good buy, comes with great tools, It is worth the money and has a heavy - duty design.

Most customers quickly discovered that the separator is a good quality pickle fork set. Also, they also found that the separator is designed for removing ball joints. Consequently, customers were eager to recommend it to friends and families.

• It came with a nice case, it holds up great and has a handle.
• This allows for precision and accuracy in its application.
• Delivers what they promise.

Best For Lower Ball: Atp Homemade Ball Joint Separator

Buy on Amazon

Not everyone likes to purchase a separators for their regular usage, but the homemade ball joint separator would be an anomoly. The homemadeball jointseparator works great and it is made with nice tools. Separate pitman arms, tie rods, and ball joints on your vehicle. Further, it has snap ring pliers and it is built with sturdy tools.

Most importantly, the homemade balljoint separator is made for a nice carrying case and it has a tie rod spreader.

Almost all buyers quickly discovered that the separators are a bitch to get out, of but this helped like a champ. In addition, a few strongly agree that the separator is a good set for a very difficult ball joint job on a land rover discovery. As a result, buyers were very happy to recommend it to friends and families.

• 6 ¾ adapter handle for use with an air hammer.
• This comes with a 15/16 jaw opening.
• A 7 ¾ inch knurled striking handle is included for use with conventional hammers.

Best For Light Trucks: Atp Technic Homemade Ball Joint Separator

Buy on Amazon

Atp Technic is known for creating pragmatic and minimalist separators for people on the go, and its line of Atp Technic Homemade Ball Joint Separators definitely falls in line with that reputation. The atp technic homemade ball joint separator comes in a durable case for convenient storage. Make sure this fits by entering your model number. And, the separator works well. It has a tie rod spreader and works as designed.

The separator is great for separating ball joints, tie rods, and pitman arms. Finally, the atp technic homemade ball joint separator comes with a 15/16 jaw opening.

Almost all customers agree that the separator is a good set and works well. And, a few also found that the separator is a good investment and performance as expected. Obviously, this separator passed the test and had very satisfied buyers eager to share their experience.

• This is fine for diary projects.
• 6 ¾ adapter handle for use with an air hammer.
• This works great and it is inexpensive.
• Separate pitman arms, tie rods, and ball joints on your vehicle.

Best For Customer Service: Ares Homemade Ball Joint Separator

Buy on Amazon

The homemade ball joint separator's material feels more premium than its price would suggest. The homemade ball joint separator works with the steering and suspension ball joints found in most cars and light trucks. Manufacturer says: For our full range of front - end service tools, check out 70840. And, it works well. It is perfect for compact cars and has a heavy - duty design.

Above all, the homemade ball joint separator is good for country of origin, is great for customer service, it is reliable and has a special design.

Most customers opine that the separator can be used by reputable shops. Also, they say that the separator is good for lower control arms. As a result, buyers were very happy to recommend it to friends and would-be buyers.

• Manufacturer says: you are backed by our performance assurance limited lifetime warranty.
• This has very good build quality and heavy duty material.
• The Manufacturer says: we've got the tools you need to get the job done now.
• This does seam that it would work on something smaller.

Best For Easy Storage: Dasbet Homemade Ball Joint Separator

Buy on Amazon

Dasbet offers a variety of separators for personal choice and yet maintains quality in all the variants. Make sure this fits by entering your model number. Moreover, the separator has a tie rod spreader and its case is nice. In conclusion, with a 4.6 rating and more than 1576 buyers, the Dasbet Homemade Ball Joint Separator stands as the best choice.

Almost all customers opine that the separator is great for separating the upper and lower ball joints from the knuckle. Moreover, a few also found that the separator comes in a case for easy storage. To sum up, many have used the separator for more than a few months without any issues, and it shows no sign of giving up.

• Ball joint separator :15/16 jaw opening.
• This includes the three different size forks.
• Application: separate ball joints tie rods and pitman arms.
• Tie rod spreader :11/16" wedge opening;.

Best For Control Arms: A Abigail Homemade Ball Joint Separator

Buy on Amazon

The best part: A Abigail Homemade Ball Joint Separator costs comparatively little and it is available to ship in 24 hours. The abigail homemadeball jointseparator is workable for different sizes of ball joints. The Manufacturer says: Our aim is to make you satisfied with the parts and the service we provide for you. The ball joint separator is is made of high quality forged steel which ensure high strength for the tools and gives it a long lifetime, perfect for professional machinists.

Most importantly, the Abigail homemade ball joint separator is perfect for great quality, It comes with a satisfaction guarantee and has professional design.

Almost all buyers agree that the separator works well with the smaller ones. And, they strongly agree that the separator is perfect for personal use at home at this price. Further, they strongly agree that this tool does the job perfectly by applying gradual and increased force.

• This works well. is great for customer service, it is black and has a capacity design.
• This is a great value and worked well as stated in the description of the seller.
• This tool worked perfectly and made the job a lot easier.
• This worked awesome, It is used for multiple uses and has a heavy - duty design.

Best For Ball Joint Splitter: Tommars Homemade Ball Joint Separator

Buy on Amazon

If you often find yourself confused about the appropriate and satisfactory separator, a homemade balljoint separator is your solution. The homemade ball joint separator is made of high quality, heat treated drop forged steel, These tools are made with longevity and durability. Spray a little bit of lubricant onto the back of the separator. The 3 pc ball joint puller set provides a perfect set of 3 popular tools for servicing the front ends of most vehicles.

Most importantly, the homemade ball joint separator is very nice and it works for ball joint splitter.

Almost all customers found that the separator come in handy one day. Moreover, a few say that the separator is a good set of pullers for the price. Overall, the tone of buyers is very positive and we believe that the separator suits the purpose.

• This comes with three different ball joint spreaders.
• This is easy to use, fits well, and does the job well.
• This allows for ball joint removal without damage to the joint and other parts.
• This is much more and it is good for very good quality.

Best Heavy Duty Design: Abn Homemade Ball Joint Separator

Buy on Amazon

Next on the list, we've got yet another separator that manages to win our hearts. It's the Abn Homemade Ball Joint Separator and it's widely considered as one of the most convenient separators you can buy. The abn homemade ball joint separator is constructed from commercial-strength cast steel with a hardened steel pivot pin and jackscrew for regular shop use. Make sure this fits by entering your model number. This scissors - type tool can be used in the shop regularly and perfectly removes tie rod ends and lower ball joints without damaging the grease boots.

Above all, the abn homemade ball joint separator is a universal tool that fits American and European cars, trucks, and even atvs.

Almost all customers opine that the separator will work for Japanese cars. Moreover, a few strongly agree that the separator is great for popping out ball joints.

• This is practical, works perfectly, it is reliable and has a heavy - duty design.
• This is a family - owned company based out of South Dakota.
• This is used for easy operation, It is metric and has a handle design.
• This is perfect for a honda cr-v.