The 11 Best Hot Runner Temperature Controllers (2022 reviews)

The Inkbird Hot Runner Temperature Controller is long-lasting, rigid and fits well with your daily use like a dream. The inkbird hot runner temperature controller is suitable for heating tape, It comes easy-to-use and has a waterproof design. Make sure this fits by entering your model number. Further, it is very small and it works for temperature control range.

Above all, the inkbird hot runner temperature controller is used for heat mats, It is designed for supply voltage and has a play design.

Almost all customers agree that the controller has been super reliable since apr 2016, all year round. Moreover, they strongly agree that the controller will cut power to your sump pump. In addition, they also found that the unit must be unplugged, there is no switch on it. In short, the tone of buyers is very positive and we believe that the controller suits the purpose.

Top Customer Quotes:

This has a replaceable NTC probe.
This is in a 12' x 25' greenhouse.
This controller or something similar would have cost an arm and a leg.
This is very good, it works flawlessly and has a simplified design.

Best For Incubator: Bayite Hot Runner Temperature Controller

Buy on Amazon

The Bayite Hot Runner Temperature Controller is satisfactory and appropriate and fits well with your regular use. The bayite hot runner temperature controller is sensitive, is good for a nice display and it is used for a low cost. High and low temperature alarms are available when the temperature overshoots your desired temperature. Also, it is used this way, it is good for easy setup and has a convenient design.

Finally, the bayite hot runner temperature controller is nice, It is great for a fair price and has a play design.

Most customers agree that the controller is designed to run in the applications range. In addition, a few say that the controller can only handle a maximum 10a current. Further, they also found that the controller is far more accurate and responsive to temperature changes.

Customers also found that its wise to buy a hot runner temperature controller, along with this controller.

Top Customer Quotes:

The unit switches the 12 vdc control side of the ssr.
This includes an instruction sheet that includes wiring diagrams and clear operating instructions.
This takes about 30 minutes and has performed well so far.
This is easy to install, worked perfectly right out of the box.

Best For Power Cable: Digiten Hot Runner Temperature Controller

Buy on Amazon

The best part: Digiten Hot Runner Temperature Controller costs comparatively low and it is available to ship in 24 hours. The digiten hot runner temperature controller is perfect for seed germination, can Google for easy instructions and it is made for output power cable length. Customize temperature and compressor delay, protecting your refrigeration equipment. The temperature controller uses a whole new pre - wired design without complicated wiring and is accessible for connecting a cooling or heating device directly.

The controller is made for heavy duty, it is suitable for heat tape and has a safe design. Moreover, the controller is very good and it is made for output power. Above all, the digiten hot runner temperature controller is suitable for water, sea water, weak acid or weak lye.

Almost all buyers found that the controller works well so far, controlling seedling heat mat. Moreover, a few also found that the controller is it'sssss first winter, so you ca speak of longevity. And, a few also found that the thermostat controller allows the freezer to start working only until it reaches the minimum temperature, in this case 35 degrees, and then it turns off the freezer. In conclusion, most customers agree that the control suits them best, and no one questions it.

Top Customer Quotes:

These make one that is 1500w @ 110vac.
This can display measurements in centigrade or fahrenheit.
This maintains narrow temperature range very well.
It is easy to figure out how to set it with the instructions.

Best For Variety Of Uses: Bnlink Hot Runner Temperature Controller

Buy on Amazon

The Bnlink Hot Runner Temperature Controller's superior materials makes sure that it ages well with use. The bnlink hot runner temperature controller is used for seedling germination, rooting, brewing, heating, fermentation, aquarium, and more. Uality and reliability you can trust. The controller turns the heater on when the temperature drops to a minute temp and turns the fan on when the max temperature is reached.

Finally, the bnlink hot runner temperature controller is great for seed germination, works as described and it is easy to configure.

Most customers agree that the controller is easy to use, reliable for temperature control, and like the dual heating/cooling option. Also, a few strongly agree that the controller can control both heating and cooling. Further, they say that this controller works great and is rated for 15amps and 1875 watts. To sum up, at the price, they believe that they got a steal of a deal with it.

Top Customer Quotes:

This has an outlet for heating and one for cooling.
This is good value for a pump house winter controller.
It is easy to operate, but the directions are difficult to understand.
This attempt to read, is great for fans and it works perfectly.

Best For Delivery Time: Pymeter Hot Runner Temperature Controller

Buy on Amazon

Pymeter line of controller comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Pymeter Hot Runner Temperature Controller is perfect for seed germination, is made for electric oven,s It provides great value and has a waterproof design. Please don't compare it to common inaccurate thermostat、thermometer or temp gun. Further, it comes with simple 4 keys, it is unbelievably easy to setup and use.

Most importantly, the pymeter hot runnertemperature controller is easy to use, safe & reliable dual outlets thermostat.

Most buyers quickly discovered that the controller can be used as an attic fan thermostat, as well as for a window fan in the hot garage. Also, they say that the controllers are adjusted and maintaining perfectly at 78. Further, they say that note: if the room is cold, the controller can keep the ceramic bulb on for more time in order to keep the heat constant. Overall, most customers agree that the controller is functionally comfortable and no one questions it.

Top Customer Quotes:

You can factory reset by switching the temp unit from the f to c setting.
This can measure ambient air temp.
This comes with "heat" and "cool" outlets or labels, simply 1 and 2.
This works fine for temp control for a small hydroponic system.

Best For Low Temperature Alarm: Finnex Hot Runner Temperature Controller

Buy on Amazon

Finnex line of controllers comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Finnex Hot Runner Temperature Controller is suitable for all heating elements up to 800 watts. The Manufacturer says: Unlike overseas companies that start using inferior components over time after building their initial 5-star reviews, we've stayed in business for over 20 years by doing the opposite. This advanced controller carries three prong power receptables that work well with all finnex titanium tubes as well as other brand 's heating elements as well.

The controller works OK and it works well. Lastly, the finnex hot runner temperature controller works as described and it works as advertised.

Almost all buyers opine that the controller has been working quite well. Also, a few also found that the controller is easy to see the water temp at a glance. Moreover, they also found that the one glaring problem with this controller is the temp probe is about 3 ft too short. Overall, many have used the controller for more than a few months without letup, and it shows no sign of giving up.

Top Customer Quotes:

This has kept it completely under control.
This has kept the tank to within 1/2 degree f.
This is used for the temp sensor.
This is easy to use, accurate control.. no drowning to change temps.

Best For Inductive Load: Ketotek Hot Runner Temperature Controller

Buy on Amazon

We would, of course, be remiss if we didn't mention Ketotek Hot Runner Temperature Controller for daily purpose. The ketotek hotrunner temperaturecontroller has a set range and it works for temperature control range. You can choose f01 mode to control the device to work in cycles, or choose f02~f04 modes to countdown to turn on or turn off the device. Also, it will keep working in cycles.

The controller is good for temperature control accuracy and it has an LCD display. Most importantly, the ketotek hot runner temperature controller can be used as a timer for cycle timing and countdown.

Most buyers find that the controller will engage or disengage a timing cycle after you've set the digits. And, they also found that the controller is in a water bath in a crockpot for inexpensive sous vide cooking. Moreover, a few also found that the controller is used to control heat in the wife's plant room with adjustable settings.

Few customers got hot runner temperature controller, along with the controller.

Top Customer Quotes:

This is easy to use right out out of the box.
This is in no way shape or form that.
This is great for a wide range of applications and it is great for ambient temperatures.
This is enough to run a small refrigerator, freezer, or a pretty good fan.

Best For Household Appliances: Weewooday Hot Runner Temperature Controller

Buy on Amazon

The Weewooday Hot Runner Temperature Controller might be a relatively new release, but it's still nothing short of impressive this year, thanks to multiple price cuts and added new features over the past few iterations. The weewooday hot runner temperature controller is suitable for household appliances, automatic irrigation, office machines, audio, automobiles, aquarium,s fish tanks etc. The ntc (10k 0.5%) probe is waterproof, and you can control the temperature at will, can also control heating or cooling according to different needs. The electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is 0.1 degrees celsius, backlash precision is 0.1 degrees celsius with high temperature protection.

The controller is effective and it is great for easy setup. Lastly, the weewooday hot runner temperature controller has a return difference, It works as expected and has a waterproof design.

One customer says - "P8 to select the one you want to change. ". Almost all customers agree that the controller is used to control a 120 mm external cooling fan on an amplifier heatsink. To sum up, at the price, they believe that they got a steal of a deal with it.

Why We Like This:

Lot of satisfied buyers.
Good brand reputation.

Best For Fan: Xiltek Hot Runner Temperature Controller

Buy on Amazon

The Xiltek Hot Runner Temperature Controller's material feels more premium than its price would suggest. The xiltek hot runnertemperature controller has 2 relay outputs to control the compressor and fan. Make sure this fits by entering your model number. The dixell temperature controller xr03cx, format 32 x 74 x 60 mm(1.26 " x 2.91 " x 2.36 " ), is a microprocessor based controller, suitable for applications on medium or low temperature ventilated refrigerating units. Lastly, the xiltek hotrunner temperaturecontroller comes with a hotkey. It’s possible to program the instrument in a quick and easy way.

Most buyers agree that the controller is a perfect fit for atosa commercial refrigerator. Overall, buyers found this to be one of the best controller for daily purposes.

Customers say that buying a temperature limit controller and hot runner temperature controller, with this controller made their life much easier.

Why We Like This:

It has 2 relay outputs to control the compressor and fan.
New and hot releases.

Best For Air Conditioner: Elitech Hot Runner Temperature Controller

Buy on Amazon

If you want nothing but the most convenient controller, then Elitech Hot Runner Temperature Controller is the one you should definitely consider. The elitech hot runner temperature controller is great for high quality and it works well for a wide temperature control range. The manufacturer says: Control the temperature through our elitech icold platform or app, detect data at any time, The chart shows the data more clearly, and the app is free to use. Also, the controller has controls temperature and it is designed for multi-function.

If the controller is higher or lower than the set temperature, the buzzer will give an alarm. Lastly, the Elitech hot runner temperature controller comes with over 26 years of hvac products manufacturing experience, Elitech produces a complete line of hvac tools, with additional refrigeration solutions, Elitech leads the new generation of smart hvac tools.

Almost all buyers opine that the control is good as it works outdoors, about 50 ft from the house. In addition, a few say that the controller features, and the lack of wifi security. And, a few also found that this temperature unit is perfect thus far. In short, most customers call the controller suits best, and no one questions it.

Top Customer Quotes:

The unit is easy to use, accurate, reliable for controlling temperature.
Set the temperature according to your needs.
[Multi-function] Its functions include power-off memory, start-up delay, temperature calibration, ℃/℉ reading, etc.

Best For High Temperature Protection: Twidec Hot Runner Temperature Controller

Buy on Amazon

The best part: Twidec Hot Runner Temperature Controller costs comparatively little and it is available to ship in 24 hours. The twidec hot runner temperature controller is used for opening size and it is great for ambient temperature. The thermostat can be widely applied in intelligent home and industrial equipment, fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other daily temperature control systems. The electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is 1 degrees celsius at 0 - 110.

Most importantly, the twidec hot runner temperature controller has a return difference and it has a set button.

Most buyers quickly discovered that the controller is programmable allowing set up for the on/off power control. Further, they say that the controller is used to cool the heating side and blow air across the cooling side to keep a mini pc from overheating in a remote harsh environment that recieved sun in the afternoon. And, they say that the set and c / f buttons simultaneously to switch into modification mode.

Top Customer Quotes:

This can control heating or cooling according to different needs.
This is used for a long time, it is best not to exceed 10a.
Lot of satisfied buyers.