The 8 Best Ignitor Furnace Surfaces (2022 reviews)

The Payne Ignitor Furnace Surface might be a relatively new release, but it's still nothing short of impressive in this year. The payne ignitor furnace surface is made with the right part, is made for exact fit and installed. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. Further, it works great, is good for fast delivery and it is very good.

The surface works perfectly and it is made for good value. Further, the surface is handled with care, is perfect for factory replacement and it is great for fast shipping. Most importantly, the payne ignitor furnace surface fixed the problem and it is strong.

Almost all customers quickly discovered that the surface would probably outlive the furnace this time. Also, they also found that the surface is perfect for timely delivery at a fair price. And, they strongly agree that this igniter works as advertised : one bolt and a snap electric fitting. Overall, for almost all buyers, it was just what they wanted.

Customers also found that its wise to buy a rv furnace flame sensor, along with this surface.

Top Customer Quotes:

This is the same item as Robertshaw 41.
This is an exact match in all ways.
This igniter is cleaned once a year or every season when doing maintenance.
This measures 61 ohms and also looks like the picture.

Best For Easy Installation: Supco Ignitor Furnace Surface

Buy on Amazon

Best part: Supco Ignitor Furnace Surface costs comparatively low and it is available to ship in 24 hours. The supco ignitor furnace surface includes the necessary hardware, instructions (where applicable) and cross reference information for easy installation. . Also, this works well for good quality and it works perfectly.

The surface works great and it is very good. Moreover, it keeps on ticking and it is ready to install. Most importantly, the supco ignitor furnace surface is durable and it is best for exact fit.

Most customers found that the surface is a perfect fit replacement for a German furnace. Moreover, a few strongly agree that the surface fits all goodman and janitrol furnaces from the 1990's to x year. And, a few say that this is a good replacement igniter, easy to install and at a good price. With no doubts, this surface passed the test and had very satisfied buyers eager to share their experience.

Few customers got gas furnace flame sensor, along with the surface.

Why We Like This:

This is inexpensive, is good for fast delivery and it takes a licking.
Good investment for the long term.

Best For A Furnace: Carrier Ignitor Furnace Surface

Buy on Amazon

Compared with other surfaces in this category, the Carrier Ignitor Furnace Surface has a convenient design. The carrier ignitor furnace surface is made with the right part, works well and it fits well. Make sure this fits by entering your model number. Also, it works great and it is great for brand name.

The surface comes with great service, is durable and it allows for easy plug. Above all, the carrier ignitor furnace surface is a good device, makes for a great buy and it is good for fast delivery.

Most customers agree that the surface has been working for nearly 2 months without a problem. And, they strongly agree that the surface is very likely to be the problem and for $20, why not give it a try. And, they strongly agree that the surface is somewhat fragile and needs to be handled with care. Overall, buyers found this to be one of the best surfaces for daily purposes.

Customers say that buying a rv furnace flame sensor and ignitor furnace surface, with this surface made their life much easier.

Top Customer Quotes:

This makes for very fast delivery and it is great with great sellers.
This is a brand new aftermarket furnace hot surface ignitor.
This works perfectly and it works as expected.
No wiring changes or adapters needed.

RELATED: Best Furnace Panel Boards

Best For Gas Furnace: Goodman Ignitor Furnace Surface

Buy on Amazon

The German ignitor furnace surface is suitable and reliable and fits well with your daily use. The German ignitor furnacesurface works well for good quality and it is perfect for easy replacement. . In addition, it worked right away, saves time and it works perfectly. Lastly, the German ignitorfurnace surface works as expected, fits well and it is made with fast shipping.

Almost all buyers found that the surface was the controller circuit board. In addition, they also found that the surface would work for this one as well. And, a few also found that this hot surface igniter has to be hot for the pilot / gas valve to open. Therefore, most customers find the surface is functionally comfortable and no one questions it.

Customers also discovered that its wise to buy a furnace heat flame sensor, along with this surface.

Top Customer Quotes:

This is the correct ignitor for your model number.
Delivers what they promise.

Best For Water Heaters: Robertshaw Ignitor Furnace Surface

Buy on Amazon

Compared with other surfaces in this category, the Robertshaw Ignitor Furnace Surface has a convenient design. The robertshaw ignitor furnace surface is made of high-purity recrystallized silicon carbide (crystar) which combines physical and thermal strength with stable electrical properties. 400 series norton hot surface ignitors deliver dependable ignition in heating systems of every description. Further, it is designed to reach ignition temperature(s) within 17 seconds.

The surface works well for home repair, is used for repairing parts and it can wait for a great deal. And, it is used for water heaters and it allows for easy replacement. Most importantly, the Robertshaw ignitor furnace surface has been installed as expected and it is great with fast shipping.

Most customers agree that the surface works well in the furnace it is intended for. Further, they strongly agree that the surface is great for the price same as an expensive one. Overall, at the price, they believe that they got a steal of a deal with it.

Top Customer Quotes:

This fits some coleman furnaces, check a cross-reference guide to see what's compatible.
A cracked hot surface ignitor w/plug.
This has fixed plumbing and it works fantastic.
Needed a hot surface ignitor w/ plug.

Best For Great Price: White Rodgers Ignitor Furnace Surface

Buy on Amazon

White Rodgers makes beautiful and great surfaces with classic and smartly chosen materials. The White Rodgers Ignitor Furnace Surface is designed for easy replacement and it is great for fast shipping. Make sure this fits by entering your model number. Also, it is made for quick delivery and it works great.

The surface is inexpensive and it works perfectly. Most importantly, the white rodgers ignitor furnacesurface is great for brand name and it is strong.

Almost all buyers found that the surface is around a $300 service call to have it replaced. Also, they strongly agree that the surface is a Sunday, in the middle of winter, in Utah. Also, they say that the original hot surface igniter used to burn out and break rather quickly. Consequently, customers were eager to recommend it to friends and families.

Top Customer Quotes:

This comes with two brackets to fit different make/model furnaces.
This works well, but keep a spare handy.
The 21d64 - 2 igniter has an operating voltage of 102v.
This works very well in many applications and excellent in some brand/model specific applications.

Best For Exact Replacement: Repairwares Ignitor Furnace Surface

Buy on Amazon

Repairwares has been making great surfaces for years, thanks to a combination of clever design and appropriate materials. The repairware ignitorfurnace surface allows certain furnace models to start or heat up. Find out that's why our product support is rock solid. Moreover, the surface is suitable for a variety of use cases, brands, and product types.

Most importantly, the repairware ignitor furnace surface is extremely fragile and sensitive to contamination.

Almost all customers found that the surface is used to for heathing system. And, a few also found that note: if the repairware igniter works, the answer is that it should. In short, most customers call the surface functionally comfortable and no one questions it.

Customers say that getting a furnace heat flame sensor, along with surface is useful.

Top Customer Quotes:

hold the igniter element is extremely fragile.
⚠️ verify compatibility with your model or ask a question before ordering.
This is handled with care, is good for fast delivery and it works perfectly.
This part is fully compatible with your model.

Best With No Adapters: Improvedhand Ignitor Furnace Surface

Buy on Amazon

If you often find yourself scrambling for an appropriate and satisfactory surface, Improvedhand Ignitor Furnace Surface is your solution. The improvedhand ignitor furnace surface fits with no adapters or wiring changes required. The Manufacturer says: High-quality materials in improvedhand, experiencing countless times of optimization and strict product manufacturing inspection, to make sure our product quality, meets the oem standards or even beyond the original, so you can feel confident to buy. This silicon carbide hot surface ignitor replaces most applications in rheem, ruud, and weathering furnaces.

Lastly, the improvedhand ignitor furnace surface has replaced part number and it fired right up.

Without any doubt, this product passed the test and had very satisfied buyers eager to share their experience.

Customers found that getting a gas furnace flame sensor, with this surface made their life much easier.

Why We Like This:

This is great for exact fit and it is good for good quality.
One of the newcomers and featured product.