It is important to have the well suited motor mount for kayak. Let’s take you step by step, type by type, and find the best motor mount for kayak for you.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Bullnose Products Motor Mount For Kayak READ REVIEW

Best For Small Footprint: Buy: Watersnake Lighter Plug READ REVIEW

Best For Good Quality: Buy: Watersnake Motor Mount For Kayak READ REVIEW

Best With Anchor: Buy: Brocraft Motor Mount For Kayak READ REVIEW

Best For Heavy Duty: Buy: Wilderness Systems Motor Mount For Kayak READ REVIEW

Best For Dinghy: Buy: Fockety Motor Mount For Kayak READ REVIEW

Best With Trolling Motor Mount: Buy: Newport Vessels Motor Mount For Kayak READ REVIEW

Best With Remote Control: Buy: Brocraft Kayak Trolling Motor Mount READ REVIEW

Best For Hand Control: Buy: Aquos Motor Mount For Kayak READ REVIEW

Best For Easy Installation: Buy: Nooew Motor Mount For Kayak READ REVIEW

Best Overall: Bullnose Products Motor Mount For Kayak

Buy on Amazon

The Bullnose Products Motor Mount For Kayak's superior materials makes sure that it ages well with use. The bullnose products motor mount for kayak is used for maximum speed, is built for very heavy duty, It is like a kayak and has a simple design. The bullnose rudder clamps tightly to a 1 1/8" (1.125") diameter shaft, of a trolling motor and provides a more accurate course when fishing or boating. The bow mount motor must be a hand cable pull, not self deploy.

Above all, the bullnose products motor mount for kayak is designed to easily install, is super easy, It runs through weeds and has an adjustable design.

Most customers think that the mount will work on the front of the boat. In addition, they say that the mountain provides all the same benefits without being perfectly aligned. Moreover, a few say that the mount will probably work OK if you mount it upside down, too. Overall, buyers found this to be one of the best mountains for daily purposes.

• This fits almost all stern mounted trolling motors and some bow mounted also.
• These fit with no trimming, plus it is great for flat bottoms.
• This is made with (included) foam tape.
• The shaft of the motor is 1 1/8 '' It will fit.

Best For Small Footprint: Watersnake Lighter Plug

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate mount. The Watersnake Lighter Plug is exactly that - it's a simple mount that hits all the right notes. The watersnake lighter plug comes with a satisfaction guarantee, it runs fine and has a nice design. The new head design also includes a digital voltage meter display, so you can keep track of your battery’s condition. This freshwater electric bow mount trolling motor for boats featuring a 54.

Finally, the watersnake lighter plug is the mother of invention.

Almost all buyers quickly discovered that the mountain is great for moving around a lake at a decent clip, even against the wind. And, they say that the mount is 12volt, 9-20 amps and salt water rated. In addition, a few also found that the mount will run for several hours of continuous use.

• This listing showed the unit with the kayak bracket.
• This fits through hobie mirage drive well w/o any tilting etc.
• The kayak bracket can be removed if you buy this item.
• This is a trolling motor, not a race engine.

Best For Good Quality: Watersnake Motor Mount For Kayak

Buy on Amazon

We would, of course, be remiss if we didn't mention Watersnake Motor Mount For Kayak for daily purpose. The watersnake motor mount for kayak is the mother of invention. The Manufacturer says: Nowadays, our watersnake electric motors are increasing anglers’ catches in more than 30 countries. This freshwater electric bow mount trolling motor for boats featuring a 54.

The mount allows for easy install, comes with a satisfaction guarantee, it comes with a foot pedal and has a simple design. Lastly, the watersnake motor mount for kayak is good for good quality, is very sturdy, it works very well and has a great design.

Almost all buyers agree that the mountain is very well built and will work on a 20’ pontoon. And, they also found that the mount is easy to connect to the boat right out of the box. In short, at the price, they believe that they got a steal of a deal with it.

• This is suitable for saltwater use, as does the description of a stainless steel prop.
• This is easy to install, light weight considering what it holds.
• This is made for kayak plus it is too big.
• This can be easily detached and can be easily attached as well.

Best With Anchor: Brocraft Motor Mount For Kayak

Buy on Amazon

The Brocraft Motor Mount For Kayak's high-end materials makes sure that it ages well with use. The brocraft motor mount for kayak does the job and it is fit and perfectly. Battery once the clamps are simple to fit and also adjusted by releasing and sliding along the mount to change its position. The brocrfatl fishing kayak trolling motor mount is designed to fit kayaks with built - in rods holders.

The mount is very easy, it is easy to remove and has a simple design. Further, it worked perfectly, is highly recommended and it looks really nice. Finally, the brocraft motor mount for kayak worked perfectly. It comes off easily and has a perfect design.

Most customers agree that the mount is great for small trolling motors... and a great idea. In addition, a few say that the mount is a suprisingly solid piece. Further, they also found that the mount does not work on every kayak.

• Adjustable for left or right hand operation.
• This can be installed within seconds and disconnects just as effortlessly.
• This fits well in the rear facing flush mount rod holders.
• This fits all isn’t true. Additionally, it is great with good materials.

Best For Heavy Duty: Wilderness Systems Motor Mount For Kayak

Buy on Amazon

The best part: wilderness systems motor mounts for kayaks costs comparatively little and they are available to ship in 24 hours. The Wilderness Systems Motor Mount For Kayak allows for a great fit, It is designed for heavy duty and has a motor style. The wilderness systems universal trolling motor mount allows you to easily install a clamp-on style trolling motor with up to 3 h.p. This kit does not come “ ready to install. ” some daily installation will be required.

The mount can be paired with wilderness systems stern mounting plates to accommodate the radar and atak models. Finally, the wilderness systems motor mountfor kayak allows (not included).boat compatibilityany boat with a flat spot on the stern big enough for a power pole.

Almost all buyers quickly discovered that the mount is designed to accept a stern motor mount, However, it may be possible to create a simple diy platform using the rear slidetrack rails and some marine board to span across the tankwell. In addition, a few also found that the mount is used to create prototype platforms for testing so you can confirm fit and function before making any purchases. Moreover, a few say that the bracket requires a relatively flat mounting surface with dimensions of approximately 9 x 9 inches, but it may be possible to install a diy mounting plate on the ride 's stern to create a suitable mounting surface. Without any doubt, this product passed the test and had very satisfied buyers eager to share their experience.

• Bracket dimensions: (l) 8.59” x (w) 8.78” x (h) 3.95”.
• This is designed for mounting trolling motors.
• Maximum recommended weight capacity of 45 lbs.
• This is made from 1/4" marine board or 1/8" metal.

Best For Dinghy: Fockety Motor Mount For Kayak

Buy on Amazon

The Fockety Motor Mount For Kayak's superior materials makes sure that it ages well with use. The fockety motor mount forkayak is made of high quality material, which makes it durable, sturdy and has a long service life. A year 's warranty, free return and exchange!we promise every customer 100% shopping satisfaction, Feel free to reach us if you have any questions about your purchase. The bracket also features a three - axle design that maximises the range of movement so that the motor can be adjusted to the optimum position for powering up rivers, exploring lakes or crossing bays.

Above all, the fockety motormount for kayak can be used in rubber dinghy,s inflatable boats, fishing boats and etc.

• Manufacturer says: we will give you a professional and detailed reply within 24 hours.
• New and hot releases.

Best With Trolling Motor Mount: Newport Vessels Motor Mount For Kayak

Buy on Amazon

We would, of course, be remiss if we didn't mention water vessels motor mounted for kayak for daily purpose. The new vessels motor mount for kayak does require a drill and 9/32" drill bit for installation. The Manufacturer says: We stand behind every product we make with industry - leading customer service and a 2 - year warranty. And, it is made to be strong, It is designed for heavy duty and has a perfect design. Most importantly, the new vessels motor mount forkayak comes with hardware needed for installing the mount.

Almost all customers opine that the mount is ideal to mount onto a kayak. In addition, they also found that this bracket also does not allow for titling of the motor, which might be advantageous for kayakers. In short, buyers found this to be one of the best mountains for daily purposes.

• The mount was not initially designed for this type of use.
• Heavy duty - made to be strong and durable.
• Good investment for the long term.

Best With Remote Control: Brocraft Kayak Trolling Motor Mount

Buy on Amazon

Compared with other mounts in this category, the Brocraft Kayak Trolling Motor Mount has a convenient design. The brocraft kayak trolling motor mount includes a two - year warranty and also can be adapted to fit either side of the kayak. Make sure this fits by entering your model number. Moreover, this gets the job done, is compatible with the power drive, it can live with overall built quality and has a good design.

Lastly, the brocraft kayak trolling motor mount is made of marine grade aluminum track bar with two rocket launcher rod holder.s.

Most customers opine that the mount is only rated for 35 pounds thrust motors. Further, a few also found that the mount is made with great quality, however the base needs to go back to the drawing board. In addition, they strongly agree that these backing plates are very important to hold the whole mount on sturdy.

• A standard motor mount allows you to affix a gas or electric motor to any kayak.
• It looks good, it allows for remote control and has a perfect design.
• Two side aluminum bases can fit different angles kayak places.
• Fabricate an aluminum motormount with a super strong, two - side nylon material protection motor clamp.

Best For Hand Control: Aquos Motor Mount For Kayak

Buy on Amazon

If you want nothing but a mount that is convenient, this Aquos Motor Mount For Kayak is certainly a right investment. The aquos motor mountfor kayak is suitable for boats weighing up to 2750lbs, max boat length (suggestion) 18ft. Let you change depths quickly, simply, securely. The haswing caymanb bow mount electric trolling motor is engineered to deliver precise control, quiet operation, and rugged durability.

The mount focuses on fishing, is best for remote control, it is energy efficient and has an ergonomic design. Lastly, the aquos motor mount for kayak can increase battery life quite a bit at any speed.

One customer says - "It installed very easily with the quick release bracket. ". Most buyers quickly discovered that the mount was a bow mount trolling motor.

• This is suitable for both salt and fresh water.
• This is equipped with a hand control.
• It is easy to maneuver, it is built with a powerful motor and has a good design.

Best For Easy Installation: Nooew Motor Mount For Kayak

Buy on Amazon

The new motor mount for kayak's material feels more premium than its price would suggest. The new motor mount for kayak is a perfect fit and it works as expected. The kayak motor rack easily slides into your existing kayak rod holders without the need to modify your kayak. The motor bracket holder kit includes a marine - grade aluminum bar, nylon protection motor clamp as well as related stainless hardware with a 165lbs rotating capacity.

The mount is compatible with all gear/rail systems such as eco system, scotty system or ram system. Most importantly, the new motor mount for kayak can be adjusted for different hull widths.

Most buyers find that the mount will be at an angle and the motor won’t sit right. In short, most customers call the mount is functionally comfort, and no one questions it.

• This can be inserted into standard flush rod holes to mount the trolling motor.
• This is great with a compatible system and it allows for easy installation.
• This included in the kit, solid and rust resistance.
• This is a multi-use kayak trolling motor mount bracket and fishing accessories mount platform.