The 12 Best Occidental No Slap Hammer Holders (2022 reviews)

The Custom Learcraft Occidental No Slap Hammer Holder's material feels more premium than its price would suggest. The custom learcraft occidental no slap hammer holder has one large packet and three small ones. Make sure this fits by entering your model number. This dewalt tool holder has a steel measuring tape clip, a webbing loop, and a loop to hang keys on.

The holder is very handy, is great for solid build quality and it is worth the money. Also, it is perfect for tape, it is very sturdy and has a functional design. Lastly, the custom learcraft occidental no slap hammer holder works well for good quality, makes for a great addition and it looks nice too.

Almost all customers agree that the holder is good for holding screw drivers, pencils, etc. In addition, they strongly agree that the holder measures, framing square, telephones, hammers, flashlights, etc. And, they also found that the clip on the ruler would get snagged on the yellow nylon rather than the metal holder from time to time.

Top Customer Quotes:

This is less "grabby" fixed the problem.
This is perfect for any insulator or sheet rocker.
If you're looking for a small, light and sturdy tool holder, look no more.
This features a loop to hand a set of keys on.

Best For Solid Build Quality: Spider Occidental No Slap Hammer Holder

Buy on Amazon

We would, of course, be remiss if we didn't mention Spider Occidental No Slap Hammer Holder for regular use. The spider occidental no slap hammer holder is compatible with all other spider tool holster products. No more setting your tool down or trusting it to a tool pouch. Moreover, the holder is made from a durable silicone infused elastic material that allows it to remain flexible while maintaining a firm hold on the tool’s handle.

The holder features a high strength 3m adhesive that securely attaches it to the side of any drill or impact driver. Further, this is great for solid build quality, It makes for a great buy and has a perfect design. Most importantly, the spider occidental no slap hammer holder is used to hang light objects for easy access during a job.

Most buyers quickly discovered that the holder fits a 2" tool belt. Additionally, it is easy to pull out for use. In addition, they say that the holder can go into a permanent open/unlatched state. In addition, they say that the holder is easy to release from the belt and easy to reattach. To sum up, the tone of buyers is very positive and we believe that the holder suits the purpose.

Top Customer Quotes:

✅ universal grips: tool grips attach to the handle of any tool.
This will always require a manual flip to remove the tool.
✅ bitgripper: store 3 to 6 driver bits on the side of your drill!.
This comes with a zip tie to hold the velcro strap.

Best For Property Manager: Gunnie Occidental No Slap Hammer Holder

Buy on Amazon

The Gunnie Occidental No Slap Hammer Holder's material feels more premium than its price would suggest. The gunnie occidental no slap hammer holder is the best and most innovative cordless drill holster, hook or tool holder available today. Whether you're laying down flooring, installing cabinets, using both hands to climb a ladder, hanging window treatments, building a deck, or working under the hood of a car, the gunnie will keep your most used tool within reach, right at your side. And, this comes with all major brands.

The holder comes with a helpful tool, It is built for impact drivers and has a simple design. In addition, it is perfect for property manager,s comes with screws and it is for auto mechanic.s. Finally, the gunnie occidental no slap hammer holder is versatile enough to work with cordless drills, nail guns, screw guns, reciprocating saws, staple guns, etc.

Almost all customers opine that the holder is easy to adjust by bending to fit handles properly. Further, a few strongly agree that the holder is made from some very pliable material but comes up short on functionality.

Top Customer Quotes:

This is very robust, it is great for cable tech and has a right - handed design.
It is manufactured in the United States.
Fully bendable, will not break and adjusts to fit your tool.
Keeps tool tight to your body.

Best For Super Strong Magnet: Holstery Occidental No Slap Hammer Holder

Buy on Amazon

Compared with other holders in this category, the Holstery Occidental No Slap Hammer Holder has a convenient design. The holstery occidental no slap hammer holder is very useful, It is capable of holding sledgehammers and has a powerful design. Your go-to holster for tools you need close at hand. In addition, it is constructed with exceptional quality and it is assembled in Idaho.

Lastly, the holstery occidental no slap hammer holder makes for a great addition, It allows for limitless possibilities and has a unique design.

Almost all customers agree that the holder is used to, but when you get used to it, it is awesome. In addition, a few say that the holder can hold flashlights, tools, magazines, and pistol easily. Also, they also found that this holster is awesome and the magnet is super strong.

Customers also found that its wise to buy a occidental no slap hammer holder, along with this holder.

Top Customer Quotes:

Your third hand - magnetic belt clip for your essential tools.
Your magmaster will never stop delighting you with its wide range of uses.
This is strong enough to hold it with confidence.
Manufacturer says: as builders and crafters, we've grown increasingly frustrated with traditional tool belts.

Best For Small Tools: Style N Craft Occidental No Slap Hammer Holder

Buy on Amazon

Compared with other holders in this category, the style craft occidental no slap hammer holder has a convenient design. The Style N Craft Occidental No Slap Hammer Holder fits belt sizes up to 3” wide. To have inside dimensions of the hammer holder ring. This versatile style of craft holder has 1 main pocket for pliers / cutters / tools.

Lastly, the style of craft occidental no slap hammer holder left to right and it looks great.

Almost all buyers opine that the holder is perfect for keeping electrical tools handy. Moreover, they also found that the holder had a great clip-on hammer loop. To sum up, for almost all customers, it was the most suitable.

Top Customer Quotes:

They had a metal hammer holder, pencil pockets in front & flashlight pocket on the side.
This is good in a data center.
This fits on a tool belt fine.
This allows easy removal from the belt.

Best For You: Lautus Occidental No Slap Hammer Holder

Buy on Amazon

We would, of course, be remiss if we didn't mention Lautus Occidental No Slap Hammer Holder for regular use. The lautus occidental noslap hammer holder has a reinforced steel holder that minimizes hammer movement, and the quality is unmatched. Stop shopping around, you won't regret this purchase. Further, the holder comes with a carpenter pouch, It is used for leather goods and has a functional design.

The holder is designed for a great price, works well for good quality, It is made for leather tool belt and has a very good design. In addition, it is best for electrician tool bag, sold separately and it is worth the price. Most importantly, the lautus occidental no slap hammer holder works with any standard 2" or up to 3 inch wide tool belt.

Almost all customers found that the holder does fit a 3inch belt but only barely. In addition, they strongly agree that the holder fits different sized belts. Furthermore, a few also found that the holder is easy to use and wear. So, customers were very happy to recommend it to friends and would-be buyers.

Top Customer Quotes:

Solid steel holder, reinforced for strength, and the cradle design reduces hammer movement.
The manufacturers says: we have plenty of choices for all types of work.
It looks great, it is built with finest quality leather and has a perfect design.
Fits up to any 3" inch tool belts (sold separately).

Best For Holding A Small Flashlight: Dickies Work Gear Occidental No Slap Hammer Holder

Buy on Amazon

The Dickies Work Gear Occidental No Slap Hammer Holder is specially designed for your daily purpose and has all useful features. The dickies work gear occidentalno slaphammer holder is very handy and it is great for construction workers. It easily slides onto belts up to 4.5 inches wide, and makes the perfect addition to your utility/tool pouch collection for your favorite belt or rig. Moreover, it is made with durable canvas and it can be of good quality.

The holder is made for great addition, has reinforced backing and it is worth the money. And, it is perfect for holding a small flashlight or a screwdriver, and one slip pocket for holding onto a few nails. Finally, the dickies work gear occidental no slap hammer holder comes with reinforced pockets and tool loops, durable webbed straps, and an assortment of pockets to store every tool in the garage, These tough bags are meant to hold up to the harshest of environments.

Almost all buyers agree that the holder is perfect for fitting one or two extra tools that are low - profile. Further, a few strongly agree that the holder is a well-made, functional and comfortable hammer holster, but the accessory sleeve is of limited use since it has no bottom and a carpenter's pencil will slip through. it. And, a few also found that the holder is of sturdy construction & good materials. In conclusion, most customers find the holder suits best, and no one questions it.

Top Customer Quotes:

Durable - durable steel hammer loop for easy access of any stored hammer.
Great addition - great for construction workers, handymen, and diyers.
This is perfect for hammer god construction, loops and pocket usful for pencils or markers.
This fits most belts, holds a hammer and it is lightweight.

Best For Additional Storage: Estwing Occidental No Slap Hammer Holder

Buy on Amazon

The Estwing Occidental No Slap Hammer Holder is capable of outshining several other holders featured in this list in overall features for the price point. The estwing occidental no slap hammer holder is good for nice thick leather, It holds up well and has a traditional style. look look. The wet - formed leather hammerholder can adapt to your hammer for a perfect fit and behind the loop is a low-profile pocket that provides additional storage for a pair of pliers, utility knife, carpenter's pencil, or other small tool. This estwing hybrid hammer holder is made from a combination of 100 % full grain cowhide leather and 1800d polyester.

The holder is perfect for great quality, it fits great and has a good design. Most importantly, the estwing occidental no slap hammer holder is built with exceptional quality, It is nice thick and has a perfect design.

Most customers quickly discovered that the holder fits perfectly & the flat pocket is great for pencils, forceps, or tweezers. Also, they strongly agree that the holder works well with nailgun. Additionally, it is great for tile / finish folks. In addition, they say that the estwing two - compartment hammer holder provides a durable leather no - slap hammer loop and a handy second sleeve to stow an extra tool like a pair of pliers or a ruler. In conclusion, for most buyers, the holder was what they were looking for.

Why We Like This:

Additional storage - A low-profile pocket provides slim storage for pliers or utility knifes.
Rivet reinforced - rivet reinforced stress points and corners for long-lasting durability.
This is constructed of rugged 1800d polyester and top grain leather for a long working life.

Best For Great Gift: American Bench Craft Occidental No Slap Hammer Holder

Buy on Amazon

Best part: American bench craft occidental no slap hammer holder costs comparatively low and it is available to ship in 24 hours. The American bench craft occidental noslap hammer holder is good for nice thick leather and it comes with an easy-to-use. The Belt loop axe and hatchet holder uses strong, solid brass riveted construction for the utmost durability. Also, the holder can ask for good quality, it is lightweight and has a perfect design.

The holder works as described, It is nice thick and has a simple design. Finally, the American bench craft occidentalno slaphammer holder is perfect for great quality, It is good for good quality leather and has a good design.

One customer says - "Using as an axe holster for a viking costume and works perfectly. ". Most buyers find that the holder is perfect for a camp axe or hammer. Overall, at the price, they believe that they got a steal of a deal with it.

Why We Like This:

This makes for a great gift and it is constructed with excellent quality.
Good brand reputation.

Best For Belt Loop: Tourbon Occidental No Slap Hammer Holder

Buy on Amazon

The Tourbon Occidental No Slap Hammer Holder's material feels more premium than its price would suggest. Further, the tourbon occidental no slap hammer holder will hold bullpins, wrench, screwdriver，small hammer, etc. It has an adjustable lace to make sure your tool is secure in place. And, the holder will hold a large or small bull pin securely. Most importantly, the tourbon occidental no slap hammer holder is available in 2 different colors: brown and black.

Overall, at the price, they believe that they got a steal of a deal with it.

Why We Like This:

The laces are adjustable to carry different types of tools.
This is constructed of harness leather with a tunnel loop.
Built to hold your tools in a vertical position hanging on your belt.
will hold bullpins, wrench ,screwdriver，small hammer and.

Best For Stainless Steel: Qulnexa Occidental No Slap Hammer Holder

Buy on Amazon

The Qulnexa Occidental No Slap Hammer Holder is capable of outshining several other holders featured in this list in overall features for the price point. And, the qulnexa occidental no slap hammerholder is used to hang woodworking hammers, geological rock hammers, rubber hammers, wrenches and other tools. Of course, you can also hang hammers, rubber hammers, small electric drills, wrenches, and other tools. The hammer holder can accommodate round handles up to 2.6inches in size. Finally, the qulnexa occidental no slap hammer holder is available in 3 colors: hammer holder 2.0''-silver, hammer holder 2.6''-silver and magnet belt clip-silver.

One customer says - "Rounded to slide over your belt and removed easily if you give it a slight twist to start it over your belt. ". Most buyers opine that the holder is a really well - made item and works extremely well. In short, most buyers agree that the holder suits best, and no one questions it.

Why We Like This:

There are mainly 4 tool products for you to choose from and meet your needs.
The stainless steel material is made of polish and ground on the surface.
This can be installed on and removed from the belt at the same time.
Make for a durable finish that will give you a lifetime of use.

Best Unique Design: Lumintrail Occidental No Slap Hammer Holder

Buy on Amazon

The Lumintrail Occidental No Slap Hammer Holder is the most desirable holder on the market today. The lumintrail occidental no slap hammer holder is made of highest quality belting leather, This hammer holder is compact and very comfortable. Manufacturer says: Occidental insists on manufacturing our products from materials made in the United States. Today, these qualities rarely coexist in manufactured products.

The holder fits up to a 3" work belt. Lastly, the lumintrail occidental no slap hammer holder made in the USA provides excellent form and function.

Why We Like This:

The Manufacturer says: we use only the best, extra-thick, water-repellent leathers available.
They are made in the USA, providing excellent form and function.
The Quadruple riveted holder provides superior holding strength for the hammer.
This has earned the reputation of having no equal.