The 8 Best Oled Boards (2022 reviews)

The Uctronics Oled Board is long-lasting, rigid and fits well with your daily use like a dream. The uctronics oled board very well and has a self-luminous design. It works without backlight, that is, in a dark environment the display is higher compared to that of an LCD display. You will like the miniature for its crispness. This oled display module is small, only 0.96 ” diagonal. It is made of 128x64 individual yellow and blue oled pixels. Each one is turned on or off by the controller chip.

The board is, except the vcc and gnd, 2 wires would be needed when using 4-wires i2c mode. Above all, the uctronics oled board worked fine, It is much more and has a nice design.

Almost all buyers found that the board is not color display but has two colors. In addition, they also found that the board is perfect for making a small game console. In addition, they strongly agree that the uctronics display has a top portion in yellow color and the bottom portion in blue.

Top Customer Quotes:

This is a great little tiny display with crystal-clear and bright little tiny characters.
This is very colorful due to the old technology.
This can be used on arduino or raspberry pi boards using the i2c interface.
The ssd 1306 is a very solid display and very easy to set up.

Best With Wifi Module: Hiletgo Oled Board

Buy on Amazon

The Hiletgo Oled Board might be a relatively new release, but it's still nothing short of impressive this year, thanks to multiple price cuts and added new features over the past few months. The hiletgo oled board works great, It can be bought for good value and has a nice design. Make sure this fits by entering your model number. Further, the board is super cool, it works well for power supply and has a neat design.

Finally, the hiletgo oled board comes with quick shipping, It is great for ribbon cable and has a simple design.

Most customers agree that the board allows a top mount for using jumper wires directly, bottom-mount for use in a breadboard, or the flexibility to solder wires directly for a more permanent installation. And, a few also found that the board was a nice little board with a small oled display. Moreover, a few strongly agree that the example code on the board will scan for open wifi access points. To sum up, at the price, they believe that they got a steal of a deal with it.

Top Customer Quotes:

This can serve as a sanity check for the board.
This even has a jst battery connector on the bottom of the board.
This is used for general serial communication over usb.
This is a breeze too, with the free arduino development environment.

Best With Battery: Aursinc Oled Board

Buy on Amazon

The Aursinc Oled Board is satisfactory and appropriate and fits well with your regular use. In addition, the aursinc oled board is perfect for lots of fun, is smart and it is much more. Make sure this fits by entering your model number. Moreover, it is super cool, is worth the price and it is current. Most importantly, the aursinc oled board is available in 2 colors: black v3 and white v1.

Most buyers opine that the board is great for resetting multiple devices. In addition, a few strongly agree that the board is a low power consumption device that makes a big difference. Without any doubt, this board passed the test and had very satisfied buyers eager to share their experience.

Top Customer Quotes:

Use it only for testing and educational purposes on your own devices.
This is pleasantly surprising and it works as expected.
This is worth every penny plus it is the greatest little gadget.
You can also use it to develop your own software.

Best With Nice Hardware: Makerfocus Oled Board

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate board. The Makerfocus Oled Board is exactly that - it's a simple board that hits all the right notes. The makerfocus oled board works great, have bought a second unit, It is available and has a good design. Workswith esp32 development board with oled. In addition, the board is safe, is compatible with open-source, it has led pwm and has solid design.

The board works fine, is white, it is current and has a simple design. In addition, it is characteristic, works well for sleep mode, it is more stable and has an amazing design. Above all, the makerfocus oledboard is black, It is good for lithium battery interface and has a perfect design.

Most buyers opine that the board is great for experimenting with esp32. And, a few strongly agree that the board makes those pins unable to be used for most other things. In addition, they say that the board allows for automatic code updates via the internet. Obviously, this board passed the test and had very satisfied buyers eager to share their experience.

Customers also found that its wise to buy a oled board, along with this board.

Top Customer Quotes:

Inch blue oled display, lithium battery charging circuit and interface.
This is made by Heltec automation.
This can be retrieved with the esptool.py read_flash command.
This board is actually heltec wifi_kit_32.

Best With Beautiful Screen: Songhe Oled Board

Buy on Amazon

Not everyone likes to purchase a board for their daily use, but the Songhe Oled Board would be an anomoly. The songhe oled board is perfect for great quality and it is extra. High contrast, thus supporting clear display with no need for backlight. And, the board is white and it is good for lots of projects.

The board was designed for a great price, works perfectly and it is very good. And, this works great and it will for excellent value. Finally, the oled board is scratch resistant, is great with a beautiful screen and it works as expected.

Almost all buyers agree that the board is using i2c address and also simply swap the gnd and vcc pins. Also, they also found that the board had to be changed to 0c in order for this module to work. Further, they say that the address shown on the board with the silk screen is not the actual address, either before or after moving the resistor. Overall, for almost all customers, Songhe product was the most suitable.

Why We Like This:

Working voltage: 3.3v - 5v; size:0.96 inch.
Communication: IIC, only two i / o ports.
Oled-ssd1306, has a more elaborate and beautiful screen than lcd, with more functions.
4-pin anti-reverse cable; characters displayed in white.

Best With Camera: Frienda Oled Board

Buy on Amazon

Not everyone likes to purchase a board for their regular use, but the Frienda Oled Board would be an anomoly. The frienda oled board is great for sleep mode, It has led pwm and has an ultra-low power design. Make sure this fits by entering your model number. Further, the board has integrated dual-mode bluetooth, is reliable, it is suitable for temperature range and has a perfect design.

The board is perfect support for the arduino development environment. In addition, it is stable, it can interfere with data rate and has a low power design. Most importantly, the frienda oledboard is compatible with arduino ide 5.

Why We Like This:

Operating voltage: 3.3v to 7v; supports sniffer, station, softap and wi-fi direct modes.
This is safe and it is perfect for other functions.
This has added vext power output pin, it is more stable and has a functional design.

Best For Supply Voltage: 10Gtek Oled Board

Buy on Amazon

The 10Gtek line of boards comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The 10Gtek Oled Board supports many chips and it is designed to supply voltage. Make sure this fits by entering your model number. Further, this is perfect for power supply voltage and suitable for power supply.

Most importantly, the 10gtek oled board is compatible with arduino mega raspberry pi 51 mcu stim 32, etc.

Why We Like This:

Embedded driver ic: ssd1306, communication: i2c/iic interface.
Good brand reputation.

Best For Ultra Low Power: Diymall Oled Board

Buy on Amazon

The Diymall Oled Board's material feels more premium than its price would suggest. The diymall oled board is great for mobile port, it is convenient and has an ultra low power design. Use air530 gps module, gps / beidou dual-mode position system support. And, it is used to display debugging information, battery power, and other information.

Most importantly, the diymall oled board perfectly supports arduino, compatible with command and gps, integrated encryption algorithm, lorawan 1.0.2 support.

Why We Like This:

✔ perfectly support arduino,compatible with command and gps, integrated encryption algorithm,lorawan 1.0.2 support.
Good investment for the long term.