It is important to have the well suited rod bending hand tool. Let’s take you step by step, type by type, and find the best rod bending hand tool for you.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Wo Rod Bending Hand Tool READ REVIEW

Best With Excellent Quality: Buy: Lsr Loreso Rod Bending Hand Tool READ REVIEW

Best For Worth The Cost: Buy: Folai Rod Bending Hand Tool READ REVIEW

Best For Quality Tools: Buy: Otc Rod Bending Hand Tool READ REVIEW

Best For Fishing Rod Holders: Buy: Toolusa Rod Bending Hand Tool READ REVIEW

Best With A Hickey Bar: Buy: Hk Porter Rod Bending Hand Tool READ REVIEW

Best For Flat Metal: Buy: Almhs Rod Bending Hand Tool READ REVIEW

Best For Overall Length: Buy: Assorts Rod Bending Hand Tool READ REVIEW

Best For Mild Steel: Buy: Eastwood Rod Bending Hand Tool READ REVIEW

Best With Brass Tubing: Buy: Mophorn Rod Bending Hand Tool READ REVIEW

Best Overall: Wo Rod Bending Hand Tool

Buy on Amazon

The Wo Rod Bending Hand Tool is capable of outshining several other tools featured in this list in overall features. The rod bending hand tool is made well and has a comfortable design. Ergonomic wide hook grips equipped with non-slip, long knurled grip handles allow you to deliver the optimal and comfortable working experience. And, this is suitable for 1/4, 5/16 and 3/8 inch (6, 8, 10 mm) o.d.

The tool is designed to bend soft copper, aluminum, thin-walled steel tubings. Moreover, the tool can easily bend the tubings from 0 to 180 degrees. Finally, the rod bending hand tool is made of high-quality, It works fine and has a knurled design.

Almost all buyers quickly discovered that the tool was suitable for soft metal tubing. Also, a few say that the tool will not bend solid steel without getting damaged. In addition, a few say that the tool is suitable for softer pipes like copper. With no doubts, this tool passed the test and had very satisfied buyers eager to share their experience.

• This is suitable for heavy duty steel and it is simple.
• 【3-in-1 capacity】three sizes of tubing 1/4", 5/16" and 3/8" o.d.
• This is easy to use with a little patience, clean hands & a plan.
• This is great for user manual, it is inexpensive and has an ergonomic design.

Best With Excellent Quality: Lsr Loreso Rod Bending Hand Tool

Buy on Amazon

Best part: Lsr Loreso Rod Bending Hand Tool costs comparatively little and it is available to ship in 24 hours. The lsr loreso rod bending hand tool is electrical and it looks great. Versatile pipe bender for all industries. This pipe bender provides a fast, economical way to produce angled bends in round tubing.

Lastly, the lsr loreso rod bending hand tool is a 3 in 1 tool and will fit 1/4”, 5/16”, 3/8” (8, 6, 10mm) tubing.

Almost all buyers found that the tool is truly a stainless steel tube then yes. Also, a few strongly agree that the tool is a good tool for a very specific kind of job. Moreover, they say that this tube bender is meant to bend tubing a minimum of 1/4 ” diameter.

• This tool works great if you 're using it for its intended purpose.
• This will use the nickel copper alloy brake tubing on Amazon and elsewhere.
• This tool is durable enough to bend spoons.
• This is used for 3/8 steel fuel line.

Best For Worth The Cost: Folai Rod Bending Hand Tool

Buy on Amazon

The Folai Rod Bending Hand Tool is capable of outshining several other tools featured in this list in overall features for the price point. The folai rod bending hand tool works for light weight and it works on soft copper. Make sure this fits by entering your model number. And, this provides great value and it is affordable.

Most importantly, the folai rod bending hand tool is simple and it is single.

Most buyers quickly discovered that the tool was suitable for a tech that swaps parts for an ac unit and might need a little help fitting some pipes here and there. In addition, they say that the tool is the best thing ever. In addition, they say that the tool makes the copper lines oblong. To sum up, the tone of buyers is very positive and we believe that the tool suits the purpose.

• The best and easiest tool for coupling copper or soft metal pipes period.
• This is great for the price, patience required.
• It is well built and has tight joints on the first job.
• This is made of light material, cast aluminum or something.

Best For Quality Tools: Otc Rod Bending Hand Tool

Buy on Amazon

The OTC rod bending hand tool's material feels more premium than its price would suggest. The OTC rod bendinghand tool is designed for square tube, It is light weight and has a comfortable design. Works on three sizes of tubing : 1/4 " 5/16 " and 3/8. Also, the tool is much more, it is automotive and has a great design.

The tool provides high quality services that demand high quality tools. Moreover, it is simple, is good for air conditioning and it is designed for a great price. Finally, the OTC rod bending hand tool is perfect for shipping weight and it works with a noticeable difference in appearance.

Almost all buyers found that the tool is a really well built sweet heart tool. In addition, they say that the tool is far easier to hand bend than to use this. Moreover, they say that the tool works well for steel brake lines, although with the new copper lines it is not necessary.

• This is perfect for small ac lines.
• This is a decent heavy duty bender.
• Capable of making 180 degree bends in copper, brass, aluminum and steel tubing.
• This is designed to hold specific size tubing in its grooves, not flat objects.

Best For Fishing Rod Holders: Toolusa Rod Bending Hand Tool

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate tool. The Toolusa Rod Bending Hand Tool is exactly that - it's a simple tool that hits all the right notes. The toolusa rodbending hand tool is bench mountable, with 2 pre-drilled holes, and includes the screws to anchor it down. It has a variety of shapes you can bend the wire around, and it also has metal posts to create unique designs with wire. And, the tool works well, is made for good value and it is inexpensive.

The tool is electrical and it has shed tool holders. Most importantly, the toolusa rod bending handtool is much more and it is black.

Most buyers found that the tool can be used on a table and easily removed. In addition, they strongly agree that the tool is strong enough to bend wire that is larger than a coat hanger too. And, they also found that the tool is great for jewelry making crafts.

• This is made from cast metal.
• This is made of a solid block of steel.
• This will bend a 3/16 inch rod.
• This is great for bending 1/8 brass wire.

Best With A Hickey Bar: Hk Porter Rod Bending Hand Tool

Buy on Amazon

Compared with other tools in this category, the Hk Porter Rod Bending Hand Tool has a convenient design. The hk porter rod bending hand tool stores easily. It has a handle length and has a strong design. The pushbutton extends the bender to 35 inch for maximum leverage. Also, this is built to get the job done fast.

The tool has been produced by cutters with a worldwide reputation for craftsmanship. Further, it is easy to adjust, it is priced right and has a comfortable design. Lastly, the hk porter rod bending hand tool provides an extensive line of products including manual cutters, hydraulic cutters, pneumatic cutters, and accessories.

Most buyers agree that the tool is great for repositioning or correcting embedded rebar where a regular bender would need to be wrestled into place to get leverage. Moreover, they strongly agree that the tool allows finishing ties in place. In addition, they strongly agree that the indexing rebar bender proved more than equal to the task of creating 90 degree bends in rebar.

• This provides more leverage as well.
• This is easy to use, comfortable handling factory bending.
• This rebar bender is made very well.
• This is easy to use and makes bending 1/2" rebar almost effortless.

Best For Flat Metal: Almhs Rod Bending Hand Tool

Buy on Amazon

Almhs line of tools comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Almhs Rod Bending Hand Tool is good value overall, is simple, it is made well and has a small diameter design. Make sure this fits by entering your model number. And, the tool is perfect for flat metal and has a strong design.

The tool is made for flat bar, provides great value, It can be bought for good value and has a superior design. Lastly, the almhs rod bendinghand tool has a stop pin, It works as advertised and has a roller design.

Most buyers found that the tool is also capable of replicable bends, a nice feature. Also, they strongly agree that the tool fits with tight tolerances and it is useful and at a low price. Moreover, a few strongly agree that this would not be the best tool for that. A better tool would be a bender that has three adjustable rollers to get the exact radius that you need in one shot.

• It is easy to use and does a good job.
• Sold by almhs,each set includes a special user's guide and parts list.
• This is well made and should give the occasional user good service.
• Forms wire, flat metal and tubing into clamps, handles, brackets, hooks, coils and more.

Best For Overall Length: Assorts Rod Bending Hand Tool

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a tool. The Assorts Rod Bending Hand Tool is exactly that - it's a simple tool that hits all the right notes. The assorts rodbending hand tool is perfect for 40 mm and it is used for overall length. The Uality is a universal hand - operated machine for bending metal bars, tubes & pipes. These circular & sharp edge dies give the freedom of making different curve sizes of the same design.

The tool has 3 pins to work as stoppers, or torque pins while bending and forming different designs. Most importantly, the assorts rod bending handtool is the ideal machine for multi-forming curves, circles & coil designs in wire/ rod up-to 5/16"(~approx 8 mm size) & flats of 1" x 1-1/8" dimensions.

• Manufacturer says: 2-1/2" we do not provide any manual for assembling the bending machine.
• Good brand reputation.

Best For Mild Steel: Eastwood Rod Bending Hand Tool

Buy on Amazon

Not everyone likes to purchase tools for their daily usage, but the Eastwood rod bending hand tool would be an anomoly. The Eastwood Rod Bending Hand Tool fits with maximum bend angle, has a bend radius and it saves space. No need for a full size hydraulic press that takes up a large amount of space in your shop. The eastwood 4 metal bender is a high quality, industrial - style tool capable of generating a powerful 2 - 12 tons of pressing force to create 90.

Most importantly, the eastwood rod bending hand tool has leveraged rotating components that generate greatly amplified crushing and bending forces which can quickly cause severe injury.

Most buyers agree that the tool is easy to read in order to repeat bends.

• Create up to 90 degree bends.
• Powerful 2-1/2 tons of pressing force.
• Maximum jaw travel: 2-1/2” ; minimum bend radius: 1/4” ; maximum bend angle: 90°.
• bends mild steel and aluminum up to 3/8" thick and 4" wide.

Best With Brass Tubing: Mophorn Rod Bending Hand Tool

Buy on Amazon

The Mophorn Rod Bending Hand Tool's material feels more premium than its price would suggest. The mophorn rod bending hand tool is great with brass tubing and it has a bend radius. Make sure this fits by entering your model number. This quality handy ring roller is an essential tool for producing chandeliers, plant holders, and candle holders.

The tool can easily be bench or pedestal mounted, It is designed for roll bending, quick bend application, and variable bend angle. And, the tool is perfect for flat bar, is single and it has a handle length. Lastly, the mophorn rod bending hand tool allows for easy operation and it is constructed with high-quality.

Most customers opine that the tool is designed to roll thicker stock. Furthermore, a few also found that the tool will roll what the rollers will fit. Also, they say that the tool is reasonably soft metal and it is great for small projects. With no doubts, this tool passed the test and had very satisfied buyers eager to share their experience.

• This is long enough, the operation is with no difficulty and more labor-saving.
• The machine is not big enough to roll a 3/8 " rod.
• This is made using only highly hardened plate steel.
• Therefore, the bender might be you answer.