The 9 Best Roofing nailers For vinyl siding (2023 reviews)

We are personally inclined towards metabo hpt roofing nailer for vinyl siding, it is not so pricy, but it overachieves its purpose and outstanding in important aspects. The Metabo coil roofing nailer does not come with any nails, nail gun, instructions, and safety glasses only. It features rapid driving and unprecedented quick response with a unique cylinder valve firing mechanism allowing you to fire up to 3 nails per second. This nailer only accepts coil roofing nails from 7/8" to 1-3/4" in length, collated at 16 degrees with wire collation and.120 in diameter. It does not contain additives or other impurities that could gum up the nailer.

It’s lightweight.

Why We Like This:

Great for installation of asphalt roofing shingles and insulation boards
Lubricates, prevents rust, and dissipates heat
Side loading magazine, convenient and easy for quick replenishment

Best For vinyl siding: Wen Roofing Nailer For vinyl siding

Buy on Amazon

We would, of course, be remiss if we didn't mention wen roofing nailer for vinyl siding for daily purpose. This is just a roofing nailer 1" and up for shingles. Doing this ALMOST eliminates any misfires and double nailing and lets you fly through your work. The second nail is easy to pull out with a hammer. It comes with the red (bump fire) trigger installed, so if you push the tip down and then pull the trigger, of course there is a high likelihood of double fire.

The changing of the coil of nails is easy enough to do while wearing thick leather gloves. This is a waste of nails and slows down work because you have to stop and remove the extra nail/nails. The gun has the multifire trigger preinstalled.

Why We Like This:

Worked flawlessly on 500sq ft of roof with
Good brand reputation

Best with No miss fires: 3Plus Roofing Nailer For vinyl siding

Buy on Amazon

We would, of course, be remiss if we didn't mention 3plus roofing nailer for vinyl siding for daily purpose. Once you get going, this little nailer can keep up just fine. It will shoot all wire coiled roofing nails. It is great for combat situations but not roofing. It is easy to set the depth of the nail after settling the air pressure. It's not quiet as easy to open as some others, but works really well.

This shoots roofing nails in a coil form. It is a good roofing gun for an occasional user. It is easy to load and works as good as the guns.

Why We Like This:

Works great, easy to use and light weight
Runs a long time and the compressor doesnt have to breathe so hard
Compact, ez to load and use
Excellent for roofing and hardie siding

Best For cedar shake project: Bostitch Roofing Nailer For vinyl siding

Buy on Amazon

The bostitch roofing nailer for vinyl siding should be able to handle its purpose and duties with ease. The coil siding nailer has an oversized tool. It features an upgraded engine and feed system that improves drive quality, nail handling, and overall performance. It sets the nails at a consistent depth. The inch a convenient depth adjustment wheel makes it easy to properly install fasteners into a variety of materials. It's composite material holds up well.

The redesigned overmold grip makes this roofing nail gun comfortable to work with this tool all day. It works well and you will like the coil feature closing mechanism. It's easy to use and very light.

Why We Like This:

Loading is easy and the whole thing is light weight
Depth adjustment for proper nail setting
One of the new comers and featured product

Best For Roofing gun: Aeropro Roofing Nailer For vinyl siding

Buy on Amazon

Next on the list, we've got yet another nailer that manages to win our hearts. It's the aeropro roofing nailer for vinyl siding and it's widely considered as nailer that has the most suitable features. This is the fastest nail gun you can get. It takes a few nails to work through the packing grease but a great coil nailer. It’s quicker & lighter than a metabo. It’s a great roofing gun, only has a couple minor issues that are more annoying than the problematic one being the sound it makes from time to time when pressing the trigger.

This gun shoots consistently and feels solid just like a hitachi but BETTER. With almost 212yrs of constant use and 3, 40ft falls, this gun keeps nailing shingles with ease. It makes from time to time when pressing the trigger. This blows Hitachi out of the water. It is designed for extra heavy duty application.

Why We Like This:

Great gun for a short time
Lightweight and speed is comparable to higher priced models
Shoots excellent works great looks great
Very powerful tool that is easy and fast to work with

Best For fence project: Dewalt Roofing Nailer For vinyl siding

Buy on Amazon

If you are searching for a satisfactory nailer for your daily usage, you cannot go wrong with the dewalt roofing nailer for vinyl siding. If you nail fast, this is a must have gun. It works well for a low end model. It’s only a roof nailer, there is a siding coil nailer and a framing nailer that will best for a fence project. The DW45rn roofing nailer has a robust engine and feed system for durability and long life, and steel skid plates with rubber inserts to protect the tool and help stop it from sliding during use.

The nail coil flap is plastic, but it’s fine and it does the job perfectly. This gun recovers very quickly and is a very quick gun. The trigger is very sensitive and double fired a couple of times. It is easy to load and use.

Why We Like This:

Robust engine and feed system for durability and long life
Works great and made the job of reroofing the garage take half the time
Delivers what they promise

Best For fence: Hbt Roofing Nailer For vinyl siding

Buy on Amazon

The hbt roofing nailer for vinyl siding should be able to handle its purpose and duties with ease. It’s an amazing and proficient nailer. It has about 400 square feet with a single layer of deteriorating shingles. It features where it won't fire unless both trigger and nozzle are depressed. It is used for nail guns all the time. It can be used on a few building projects, no problems so far. It comes with a nice Plastic case. It is easy to use and adjust, pretty much self explanatory.

Why We Like This:

Works as well as higher priced nail guns
Super light-weight / easy to use
New and hot release

Best For scratching up The lenses of safety glasses: Freeman Roofing Nailer For vinyl siding

Buy on Amazon

Best part: freeman roofing nailer for vinyl siding costs comparatively low and it is available to ship in 24 hours. This air powered nail gun is compatible with 15 degree wire collated roofing nails from 34" to. It is easy to use, not too heavy or bulky, but sometimes it would shoot two nails at the same time. The belt hook is the part that floats around, and while it appears to be injection molded Nylon or Zytel, the hardware to attach it to the butt end of the gun is a steel machine screw and nut. It is perfect for scratching up the lenses of safety glasses too.

This pneumatic nail gun also features an air filter anti. The case is good, with sliding latches, but still with a 'living' hinge that will eventually separate, given enough age and open/close cycles. It comes with oil and safety glasses too. This gun does feature a shingle guide that slides along the bottom and locks wherever you want it.

Why We Like This:

Dust cap to keep internal components free of dust and debris
Punches through hardy plank, sheathing and into studs easy enough
Made a medium roofing project easy

Best For tight spaces: Pneu-Tools Roofing Nailer For vinyl siding

Buy on Amazon

The pneu-tools roofing nailer for vinyl siding's high-end materials makes sure that it ages well with use. It reduces time and hassle of vinyl siding installation. The RAPID-FIRE trigger and pneumatic nail feeder increases speed and efficiency. It is ideal for tight spaces on complex roofing projects.

Why We Like This: