The 12 Best Sbc Blower Intake Manifolds (2022 reviews)

The Dorman Sbc Blower Intake Manifold is long-lasting, rigid and fits well with your regular usage like a dream. The Dorman sbc blower intake manifold goes strong, fits correctly, It is highly recommended and has a proven design. Make sure this fits by entering your model number. Moreover, this is higher can trust with good service and it is great with same - day shipping.

Most importantly, the Dorman sbc blower intake manifold is flat, makes for a great buy, It looks great and has an improved design.

Most customers agree that the manifold has o rings that take place of the intake gasket. Further, they say that the manifold allows access under it, which is very convenient. Also, a few also found that the manifold is made by Holley motorsports, but cannot afford it. With no doubts, this product passed the test and had very satisfied buyers eager to share their experience.

Top Customer Quotes:

This comes with different screws to order to reinstall brackets, fuel rail and coil packs.
The manifold fit well and fixed the problem with water leaks.
This is perfectly and 1/3rd cost of the factory one.
This makes accessing things even after they are installed easier as well.

Best For Sbc: Edelbrock Sbc Blower Intake Manifold

Buy on Amazon

Compared with other manifolds in this category, the Edelbrock Sbc Blower Intake Manifold has a convenient design. The edelbrock sbc blower intake manifold is idle at 5, 500 rpm. Make sure this fits by entering your model number. The edelbrock performer intake manifold delivers superior performance with square - bore carburetors.

The manifold works great, comes with installation instructions, It is highly recommended and has an injection style. Also, this has better throttle response and it allows for a great appearance. Lastly, the edelbrock sbc blower intake manifold is present and it fits correctly.

Almost all buyers opine that the manifold will fit except you cannot use the 4 center bolt holes. In addition, they say that the manifold will be a marked improvement over stock, especially if you get some headers. Further, a few strongly agree that the manifold is made for a built engine that performs up to 6500rpms. In short, at the price, they believe that they got a steal of a deal with it.

Customers say that getting a sbc blower intake manifold, along with manifold is useful.

Top Customer Quotes:

This is square bore.. a stock quadra jet will not on the 2701.
These make intakes for boats plus, if it are a sbc 307.
This can be used on the el camino and it ran great.
This is designed for the chevy 305 and 350 engines.

Best For L: Moroso Sbc Blower Intake Manifold

Buy on Amazon

The Moroso Sbc Blower Intake Manifold is capable of outshining several other manifolds featured in this list in overall features for the price point. The moroso sbc blower intake manifold is good for country of origin, is great for a great price and it is thick. Make sure this fits by entering your model number. And, this is perfect for great quality, looks great, it is very thick and has a product design.

Lastly, the moroso sbc blower intake manifold worked perfectly and it is black.

Almost all buyers quickly discovered that the manifold is easy to get to in tight places. Further, they strongly agree that the manifold allows more room to install and removed with its head design. Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

Customers discovered that getting a sbc blower intake manifold, along with manifold is useful.

Top Customer Quotes:

This is easy to work with, with a 12 point socket or hand wrench.
This comes with a single plane manifld.
Item package weight : 0.62 pounds.
This came in the moroso package that way.

Best With Part Number: Gm Sbc Blower Intake Manifold

Buy on Amazon

Compared with other manifolds in this category, the Gm Sbc Blower Intake Manifold has a convenient design. The gm sbc blower intake manifold is designed for a great price and it is perfect for exact replacement. Make sure this fits by entering your model number. Further, this comes with part number and it is limited.

Finally, the gm sbc blower intake manifold is compatible and it is designed for easy install.

Most buyers found that the manifold is easy to install, fits perfectly and fixes problems. Furthermore, a few also found that the manifold includes a fuel rail or throttle body. And, they strongly agree that the manifold is for a 2013 chevy cruze 1.4.

Top Customer Quotes:

This comes with a check valve, orange rubber nipple, bolts and gasket already.
This will only fit only Chevrolet and buick.
Offering the quality, reliability, and durability of gm oe.
This can fit for the right side and it is good for engine codes.

Best For Worth The Money: Nibbi Sbc Blower Intake Manifold

Buy on Amazon

Nibbi offers a variety of manifold for personal choice and yet maintains quality in all the variants. In addition, it is designed for perfect match, works great and it is worth the money. We would, of course, be remiss if we didn't mention Nibbi Sbc Blower Intake Manifold for daily usage. Finally, the nibbi sbc blowerintake manifold fits perfectly, works well for hose clamp and it comes with direct fit.

One customer says - "went on perfectly and worked well. ". Most buyers quickly discovered that the manifold fits the apollo 250 db36.

Customers discovered that getting a motorcycle air intake filter, with this manifold made their life much easier.

Why We Like This:

New and hot releases.
Good brand reputation.

Ideal For High Performance: Assault Racing Products Sbc Blower Intake Manifold

Buy on Amazon

Not everyone likes to purchase a manifold for their regular usage, but the Assault Racing Products Sbc Blower Intake Manifold would be an anomoly. The assault racing products sbc blower intake manifold has a design for outstanding power from 3000 to 7500+ rpm. Make sure this fits by entering your model number. These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones, such as 4 corner water outlets and nitrous bosses, and the best part.

Above all, the assault racing products sbcblower intakemanifold works with part numbers and has a single plane intake style.

Most buyers found that the manifold will, the description states up to 1995 sbc. In addition, they say that the manifold fits sbc 400 well and fits and looks good. no regrets.

Few customers bought sbc hei distributor, along with the manifold.

Why We Like This:

Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
This is a new satin aluminum high rise single plane intake for small block chevy.
This allows custom porting for maximum power.
Unique removable water flow divider to eliminate the thermostat in racing applications.

Best With Bolt Hole Pattern: Tyfyb Sbc Blower Intake Manifold

Buy on Amazon

Tyfyb makes beautiful and great manifold with classic and smartly chosen materials. The Tyfyb Sbc Blower Intake Manifold is 100% new, never used or installed. Make sure this fits by entering your model number. Also, the manifold will not fit under the corvette hood.

Most importantly, the tyfyb sbc blower intake manifold is designed to be used with holley, carter afb or edelbrock square flange carbs.

Most buyers opine that the manifold is possible if you're using vortex heads. Also, a few say that the manifold is for old style heads, not the vortecs. Moreover, they say that the manifold that is shown works with the old style and tbi heads. In conclusion, the tone of buyers is very positive and we believe that the manifold suits the purpose.

Customers found that buying a sbc racing intake manifold, along with manifold is useful.

Why We Like This:

power comparable to single plane manifolds yet retains the throttle response/driveability of a dual plane.
Carburetor flange type:4-barrel square bore;power range is 1500-6500 rpm.
Fitment:fits 1957-86 sbc chevy engine applications.
Intake gaskets with 1.23" wide x 1.99" tall port holes;material:aluminum;bolt hole pattern:5.160" x 5.625";.

Best For Air Flow: Demotor Performance Sbc Blower Intake Manifold

Buy on Amazon

If you want nothing but a manifold that is reliable, this Demotor Performance Sbc Blower Intake Manifold is certainly a wise investment. Moreover, this allows for very good quality, It is great for good quality and has a high - rise design. Make sure this fits by entering your model number. Most importantly, the demotor performance sbc blower intake manifold is designed for maximum air flow.

Therefore, customers were very happy to recommend it to friends and families.

Customers say that buying a sbc 350 hydraulic roller cam kit, along with manifold is useful.

Why We Like This:

High rise design for maximum air flow.
Good brand reputation.

Best For Fuel Pressure: Auto Dynasty Sbc Blower Intake Manifold

Buy on Amazon

Next on the list, we've got yet another manifold that manages to win our hearts. It's the Auto Dynasty Sbc Blower Intake Manifold and it's widely considered as the manifold that has the most suitable features. The auto dynasty sbc blower intake manifold is lower, it is professional and has product design. Make sure this fits by entering your model number. And, this is good for o-rings and it raises the engine cover.

Lastly, the auto dynasty sbc blowerintake manifold works fine and it is thick.

Most buyers agree that the manifold is recommended that these are labeled prior to. In addition, a few say that the manifold features the back of the cap and screws the front of the cap. Also, they strongly agree that the manifold comes with the throttle body gasket as well. In conclusion, for most customers, Auto Dynasty product was the most suitable.

Top Customer Quotes:

And secure it using the hex nut previously removed from the old manifold.
21.0 torque all ten bolts in the sequence specified in the intake manifold.
Slightly remove the engine cover from the top of the manifold.
This looks to be an exact copy of the original.

Best With Popular Aftermarket Square Bore: Jegs Sbc Blower Intake Manifold

Buy on Amazon

Not everyone likes to purchase a manifold for their regular usage, but the Jegs Sbc Blower Intake Manifold would be an anomoly. The jegs sbcblower intake manifold fits with popular aftermarket square bore 4150 carburetors including Edelbrock, holley, quickfuel, proform, and more. Make sure this fits by entering your model number. Also, the manifold fitted gm and Chevrolet cylinder heads from 1955 through 1986.

Above all, the jegs sbc blower intakemanifold improved performance and it looks awesome.

One customer says - "Definitely increased throttle response and upped the hp. ". Almost all buyers quickly discovered that the manifold is cheaper than some of the Chinese crap. It turns out it is a very nice cast, neat and clean. To sum up, most customers call the manifold suits best, and no one questions it.

Customers say that getting a sbc hei distributor and sbc 350 hydraulic roller cam kit, along with manifold is useful.

Why We Like This:

This is the longest and it comes with an adapter plate.
Idle to 5500 rpm power band for street or mild race applications.
Fabricated from cast aluminum for weight savings and improved performance.
This provides great value and it comes with a power band.

Best Improved Design: Auto Parts Prodigy Sbc Blower Intake Manifold

Buy on Amazon

If you often find yourself confused about convenient and suitable manifold, Auto Parts Prodigy Sbc Blower Intake Manifold is your solution. The auto parts prodigy sbc blower intake manifold is compatible and it is durable. Make sure this fits by entering your model number. These cast-aluminum manifolds are pressure-tested for leaks.

Most importantly, the auto parts prodigy sbc blower intake manifold is a brand new intake manifold.

To sum up, buyers found this to be one of the best manifold for daily purposes.

Customers also discovered that its helpful to get a vortec intake manifold bolt, along with this manifold.

Why We Like This:

Replaces original equipment (oe) number: 2116.
This is worth the money and has an improved design.
Improved power from idle to 6,500 rpm.

Best For More Power: Weiand Sbc Blower Intake Manifold

Buy on Amazon

The Weiand Sbc Blower Intake Manifold's superior materials make sure that it ages well with use. The weiand sbc blower intake manifold fits well and it comes with a power band. Make sure this fits by entering your model number. The popular " x - terminator " single plane manifold series was launched in 1972 and high performance aluminum water pumps were made by Weiand the following year.

Finally, the weiand sbc blower intake manifold is the first aluminum intake on the market.

In short, at the price, they believe that they got a steal of a deal with it.

Why We Like This:

Look to us as your power source.
This is crafted with a nice finish and has a product design.
To make more power, you have to get more air into your engine.