The 8 Best Suspension Sag Tools (2022 reviews)

Kei Project makes beautiful and outstanding tools with classic and higher-grade materials. The Kei Project Suspension Sag Tool works fine, is suitable for universal vehicle support and it is made of powder-coated steel. The small, medium, and large shock wrench spanner set makes it easier to fit most stock and aftermarket shock suspensions and coilovers. This shock spanner wrench set is made with rust - resistant, high - quality steel to give it ideal strength, balance, and flex for heavy pulls or turns.

The tool is sturdy and it can be bought for good value. And, the tool worked perfectly and it is simple. Lastly, the kei project suspension sag tool works great and it worked fine.

Most customers opine that the tool is 4 sizes but it's actually 3 and a duplicate of the 4. Also, they say that the tool is used for coil overs. In conclusion, the tone of buyers is very positive and we believe that the tool suits the purpose.

Customers also found that its wise to buy a suspension spanner, along with this tool.

Why We Like This:

This is great for value for money and it has a ratchet.
Lot of satisfied buyers.

Best For Compressing Truck Springs: Orion Motor Tech Suspension Sag Tool

Buy on Amazon

Not everyone likes to purchase tools for their daily purpose, but the Orion Motor Tech Suspension Sag Tool would be an anomoly. The orion motor tech suspension sag tool has built-in detent pins, very easy and it can be bought for good value. Manufacturer says: As a professional manufacturer of automotive tools, we are driven to provide top quality products and wonderful user experiences for both professional and amateur mechanics. Note: If the strut is too close to the tool, 115 - inches threaded rods for 10.

The tool is great for high quality, is very sturdy and it is easy to use. Also, it is designed to withstand extreme pressure in any environment, ideal for professional mechanics and automotive repair novice. Lastly, the orion motor tech suspension sag tool is to repair a car and how worn-out the repair tools can be.

Almost all buyers opine that the tool is easy to make a compressor if the shocks you're installing use the same retainer system as oem but aftermarket shocks like kyb have a different retainer and need to be compressed from the outside. Moreover, they say that the tool is great for passenger cars and mini van's but not for full - size trucks or suvs. Further, a few strongly agree that the only real alternative is a hook type compressor for mcpherson struts, but the ones that have 2 hooks at either end are for larger diameter coils, so they wo n't fit the small diameter jag spring properly or safely. Overall, the tone of buyers is very positive and we believe that the tool suits the purpose.

Top Customer Quotes:

It is sturdy and it is very safe.
This is a good tool for compressing truck springs.
This needs coil spring compressors and it is safer.
This will compress quickly with a ratchet.

Best For Low Profile: Atlin Suspension Sag Tool

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate tool. The Atlin suspension sag tool is exactly that - it's a simple tool that hits all the right notes. The Atlin suspension sag tool will spread the spindle housing hub away from the strut and allow it to be removed.what are the dimensions and materials. ?. Make sure this fits by entering your model number. The product It would be impossible to list every model, but below are the most common vehicles requiring this tool.

The tool worked fine, it worked perfectly and had a superior design. Further, the tools include the golf gti, jetta, passat, a3, 3 series, focus. Lastly, the Atlin Suspension Sag Tool is crafted from hardened s2 tool steel, a material used in premium tools and known for its extreme toughness, This spreader socket will not yield under high torque applications.

Almost all customers agree that the tool is a must need for removing struts on German - made cars. Moreover, they strongly agree that the tool is perfectly intended and also it is used for lowering the springs. And, a few strongly agree that the tool is designed for that, or maybe this is what would make it different from some of the more well-known brands. In short, at the price, they believe that they got a steal of a deal with it.

Few customers got _mac_tools_ triple square socket set, along with the tool.

Top Customer Quotes:

The thing about this tool working properly is cleaning the strut mount.
This is easy to position and insert the retaining bolt.
This is made for high quality, it works perfectly and has a great design.
This features an oval - shaped head.

Best For Heat Treated Steel: Fekuar Suspension Sag Tool

Buy on Amazon

Compared with other tools in this category, the Fekuar Suspension Sag Tool has a convenient design. The fekuar suspension sag tool is black and it can ask for good quality. Remove coil spring to replace or repair shock absorbers, spring set struts, etc permits quick and safe removal or installation of springs precision machined steel bolts drop forged, heat treated steel. In addition, the tool works great and it very easy. Most importantly, the fekuar suspension sagtool is designed to be the most heavy - duty and safest spring compressor available.

Almost all buyers quickly discovered that the tool is difficult to fit a straight edge on a coiled spring. Moreover, they strongly agree that the tool is made with a curve in the clamp ends. Also, a few say that the tool can damage the protective coating on the springs.

Customers say that buying a suspension sag tool and _cleco_ torque tool, with this tool made their life much easier.

Top Customer Quotes:

▲ maximum jaw opening: 15", minimum jaw distance: 4".
This is designed for full - size struts.
▲ all black powder coated finished.drop forged, heat treated steel construction.precision machined steel bolts.

Best For Rust Prevention: Leimo Kparts Suspension Sag Tool

Buy on Amazon

The Leimo Kparts Suspension Sag Tool gives the top-tier tools a run for their money by offering flagship specs at a much more affordable price. The leimo kparts suspensionsag tool is designed with a front hook that is provided to engage with side holes or slots, so they don't slip or wear out. Steel spanner wrench set for adjustable coilover shocks. In addition, the tool is perfect for powder coating for durability and it would be perfect with excellent quality.

The tool features a c-shape shock spanner wrench. Above all, the leimo kparts suspension sag tool is perfect for surface finish and it is easy to use.

To sum up, the tone of buyers is very positive and we believe that the tool suits the purpose.

Customers also discovered that its wise to buy a suspension sag tool, along with this tool.

Why We Like This:

This is built to last, it works great and has a hook design.
You will receive 4 pieces of coilover adjustable spanners in 4 different sizes.
Good brand reputation.

Best Hook Design: Bentolin Suspension Sag Tool

Buy on Amazon

The Bentolin Suspension Sag Tool might be a relatively new release, but it's still nothing short of impressive this year, thanks to multiple price cuts and added new features over the past few months. Make sure this fits by entering your model number. Moreover, the tool is designed for those specialty model coil-overs found on certain apexi, h&r, kw and more. In short, with a 4.5 rating and more than 168 buyers, the bentolin suspension sag tool stands as the best choice.

Therefore, buyers were eager to recommend it to friends and would-be buyers.

Why We Like This:

4Pc universal coilover shock spanners wrench set for adjustable coilover shocks.
Delivers what they promise.

Best For Good Quality: Moebulb Suspension Sag Tool

Buy on Amazon

Next on the list, we've got yet another tool that manages to win our hearts. It's the Moebulb Suspension Sag Tool and it's widely considered as the tool that has the most suitable features. The moebulb suspensionsag tool is good for rust prevention and has a great design. Make sure this fits by entering your model number. Further, the tool is sturdy, is crafted with great seller and it is good for good quality. Finally, the moebulb suspension sagtool is black, It is perfect for powder coated for durability and has a hook design.

Almost all buyers found that the tool works well but could be improved. And, they also found that the tool fits around the coil perfectly for when they stuck together.

Why We Like This:

[ wrench size ] : 1pcs 55-65mm,1pcs 65-75mm,2pcs 80-90mm.
[ package included ] : 4pcs wrenches.
Professional and sincere service allows you to take no risks to purchase.

Best For Those Special Types Of Elbows: Mekar Suspension Sag Tool

Buy on Amazon

If you often find yourself scrambling for an appropriate and satisfactory tool, Mekar Suspension Sag Tool is your solution. The mekar suspension sag tool is compatible with skunk2 adjustable sleeve coilovers, dme coilovers, function form type 1 and type 2 coilovers, Cusco, hks, tein, Truhart coilovers, apexi, d2, Megan etc. Make sure this fits by entering your model number. And, this is suitable for most coilovers with only 2 large adjustable coils. Finally, the mekar suspension sag tool is designed for those special types of elbows.

Why We Like This:

【1x mid size wrench】- especially designed for those special types of elbows.
Manufacturer says: we will reply in 24 hours asap.
New and hot releases.