The 8 Best Tpo Pipe Boots (2022 reviews)

The Dektite TPO pipe boot is the epitome of what a great boot should be. The Dektite Tpo Pipe Boot is great for metal roofs and it is best for fast service. Make sure this fits by entering your model number. In addition, it can be cut along the seam and resealed with provided clips.

Finally, the dektite tpo pipe boot is very sturdy and it is very good.

Almost all buyers found that the boot is made for the purpose of going around pipes on a metal roof when the flashing can't be slipped over the top. And, a few say that the boots are perfect, passed the roof inspections with no problems. Further, a few say that the dektite retrofitted electrical mast boot fit perfectly and zipped closed after sizing, cutting and fitting.

Customers say that getting a tpo pipe boot, along with boot is useful.

Top Customer Quotes:

Easily customize pipe boot size on the job site with shears or heavy scissors.
The boot is split and that clamp holds the boots together.
Continuous service temperature ranges from -58f to 239 f (epdm).
This is not too exciting to review, but it is necessary.

Best For Shingle: Golden Rule Fasteners Tpo Pipe Boot

Buy on Amazon

Golden Rule Fasteners offer a variety of boots for personal choice and yet maintain quality in all the variants. The golden rule that fasteners pipe boots is best for stainless steel and it is stainless. Make sure this fits by entering your model number. The residential retrofit pipe flash is an epdm retrofit pipe flash for use on a shingle roof.

Above all, the golden rule fasteners to pipe boots is recommended for use on roofs with a pitch of 15.

Most customers agree that the boot is a great solution to failing old flashing. Moreover, a few say that the boot includes instructions with the pipe flashings. And, they also found that this flashing is primarily intended for electrical masts where installing the flashing over the pipe ( like a plumbing vent ) is impractical. With no doubts, this boot passed the test and had very satisfied buyers eager to share their experience.

Why We Like This:

Reinforcing ribs inside the cone helps to stand up under snow loads.
Withstands temperatures up to 239° f.
The flashing fits pipes with an outside diameter of 1/4 " - 5 3/8.

Best For Easy Install: Rubbergard Tpo Pipe Boot

Buy on Amazon

The Rubbergard Tpo Pipe Boot is capable of outshining several other boots featured in this list in overall features in its price range. The rubbergard tpo pipe boot is perfect for do-it-yourself homeowners or roofing contractors. Make sure this fits by entering your model number. Further, it is durable, is quality and it is designed for professional installation.

The boot is strong, looks good and it very easy. In addition, this provides excellent low temperature properties and a longer service life. Most importantly, the rubbergard tpopipe boot is easy to handle and it is flexible.

Almost all buyers found that the boots came in 5 foot intervals. And, a few also found that the boots work in Alaska, You'll be fine. Also, a few also found that the boots can be used on a mobile home.

Top Customer Quotes:

This allows design versitility and easy installation.
This is good for good quality and it is much cheaper.
Has outstanding durability and low life cycle cost means excellent value.
This is made for sealing around chimneys.

Best For Shingle Roof: Ultimate Pipe Flashing Tpo Pipe Boot

Buy on Amazon

Ultimate Pipe Flashing has been making great boots for years, thanks to a combination of clever design and appropriate materials. Furthermore, the boot fits pvc & abs 2" pipe. Make sure this fits by entering your model number. Finally, the Ultimate Pipe Flashing Tpo Pipe Boot is durable and it is best for high quality.

Almost all customers opine that the boot is easy to install and really well made. Moreover, a few strongly agree that the boot is designed for shingle roof.

Customers discovered that getting a pvc pipe boot, along with boot is useful.

Top Customer Quotes:

Generous flashing, kynar brown finish, 24 gauge galvanized.
This is the right part for the job.
Premium material choices allow it to withstand even the harshest conditions.
Guaranteed for the life of the shingle, cedar, tile or slate.

Best With Any Roof Pitch: Ips Tpo Pipe Boot

Buy on Amazon

Compared with other boots in this category, the ips TPO pipe boot has a convenient design. The ips TPO pipeboot is designed to direct water away from critical areas on the roof and prevent penetration. Make sure this fits by entering your model number. The water roof flashing is constructed of a galvanized steel base to prevent rust and cracking.

The boot is white and it is good for weather resistance. And, the boot fits a 1-1/4" or 1-1/2" 2" and 3" vent pipe. Above all, the ips TPO pipe boot features an elastomeric rubber collar that is resistant to ultraviolet, ozone and harsh weather.

Most buyers found that the boot can also be trimmed if needed. Also, they say that the boot is not compatible with 1 1/4" per description. And, a few say that the rubber collar on this ips flashing is superior to the oatey and other brands. Overall, many have used the boot for more than a few months without any complaints, and it shows no sign of giving up.

Customers discovered that getting a pvc pipe boot, with this boot made their life much easier.

Why We Like This:

Tested for ultraviolet ozone & weather resistance.
Use water 3-n-1 roof flashing to seal roof penetrations against water damage.
This tested for ultraviolet and it tested for ultraviolet ozone.
This is compatible with 1-1/4 inch, 1-1/2 inch, 2 inch or 3 inch pipes.

Best For Residential Use: Cofair Tpo Pipe Boot

Buy on Amazon

We would, of course, be remiss if we didn't mention Cofair Tpo Pipe Boots for daily purpose. The Cofair TPO pipe boot is a great great seller, works as expected and it is great with fast shipping. Make sure this fits by entering your model number. And, the boot is white, installed easily and it works well. Above all, the cofair tpopipe boot is self-adhesive and it is ideal for residential use.

Overall, for almost all buyers, it was what they were looking for.

Why We Like This:

Compatible with 1 - 6 inch pipes.
Use to seal around roof penetrations on EPDM roofs.
Lot of satisfied buyers.

Best For High Temperature: Dektite Tpo Pipe Boot

Buy on Amazon

Compared with other boots in this category, the Dektite Tpo Pipe Boot has a convenient design. Manufacturers recommended temperature ranges are clearly stated. Please verify this product will meet the specifications of your installation or product damage may occur in single wall chimney applications. Consider using a high temperature silicone flashing product that is rated for high temperature applications. Also, the boot is 11" x 11" - pipeboot fits 3" to 7" outside pipe diameter. To sum up, with a 4.7 rating and more than 120 buyers, the dektite tpo pipe boot stands as the best choice.

With no doubts, this boot passed the test and had very satisfied buyers eager to share their experience.

Few customers bought tpo pipe boot, along with the boot.

Why We Like This:

Continuous service temperature ranges from -58f to 239f (epdm).
If trimmed and installed correctly, pipe flashing will not break or crack.
20 - year manufacturer's warranty against manufacturing defects.
If trimmed and installed correctly, pipe flashing will not break or crack.

Best For Siding: Flashers Tpo Pipe Boot

Buy on Amazon

The flashers TPO pipe boot is capable of outshining several other boots featured in this list in overall features for the price point. The Flashers Tpo pipe Boot is a family-owned small business that employs an American workforce. Manufacturer says: Our flashers product line holds a certificate of listing with iapmo r&t. In addition, it is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.

The boot allows for expansion, contraction, and pipe vibration. Finally, the Flashers Tpo Pipe Boot allows them to fit any roof pitch or metal profile.

Why We Like This:

Product failure may occur with temperatures exceeding applicable ranges.
This is made in the USA by an American workforce.
A single wall pipe with flashers pipe flashing mounted close to the heat source.
100% made in the USA by an American workforce.