It is important to have the best trolling motor side mount. In the following post, we will help you to select the best trolling motor side mounts.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Bullnose Products Trolling Motor Side Mount READ REVIEW

Best For Jon Boat: Buy: Attwood Trolling Motor Side Mount READ REVIEW

Best For Good Quality: Buy: Newport Vessels Trolling Motor Side Mount READ REVIEW

Best With Electric Trolling Motor: Buy: Minn Kota Trolling Motor Side Mount READ REVIEW

Best For Aluminum Boat: Buy: Pro Controll Trolling Motor Side Mount READ REVIEW

Best For Small Footprint: Buy: Watersnake Trolling Motor Side Mount READ REVIEW

Best With Gps: Buy: Haswing Trolling Motor Side Mount READ REVIEW

Best For Easy Recharge: Buy: Aquos Trolling Motor Side Mount READ REVIEW

Best For Heavy Duty: Buy: Wilderness Systems Trolling Motor Side Mount READ REVIEW

Best With Remote Control: Buy: Brocraft Trolling Motor Side Mount READ REVIEW

Best Overall: Bullnose Products Trolling Motor Side Mount

Buy on Amazon

The look and feel of these mounts are consistent with the high quality we're used to from the rest of Bullnose Products's lineup. The Bullnose Products Trolling Motor Side Mount measures 105" by 475" and is designed to fasten to a 1 18" (1125") diameter shaft, which makes it fit most transom mount trolling motors with 24. Please note, it will not work on a self deploy bow mount trolling motor. The system requires the shaft to slide up and down where the rudder needs to be attached.

The mount does the job, is very sturdy, it is incredible and has a great design. Furthermore, it measures 10.5" high x 4.75" wide and has a 1 1/8" shaft diameter. Most importantly, the bullnose products trolling motor side mount is used for maximum speed, fits perfectly. It is like a kayak and has a perfect design.

Most buyers found that the mount will probably work OK if you mount it upside down, also. Moreover, a few say that the mount is what your setup looks like. Then you would not want a bullnose rudder on the shaft of the self deploy system. Moreover, a few strongly agree that the rudder is mounted on the shaft above the prop, but below the water line. Overall, the tone of buyers is very positive and we believe that the mount suits the purpose.

• The bow mount motor must be a hand cable pull, not self deploy.
• This makes the motor have a sharper response.
• This improves control of an inflatable 5 person boat.
• This measures 1 1/8" in diameter or slightly smaller.

Best For Jon Boat: Attwood Trolling Motor Side Mount

Buy on Amazon

If you often find yourself confused about the appropriate and satisfactory mount, Attwood Trolling Motor Side Mount should be your first option for buying. The attwood trolling motor side mount works well for good quality, It works as described and has a nice design. Male plug (motor side) equipped with wing tabs for easy installation and removal. And, this is composed of (2) 8-gauge wires.

The mount fits perfectly. It worked perfectly and has a good design. Moreover, it is built with a never-fail attitude. Lastly, the attwood trolling motor side mount is suitable for small boat, It is installed easily and has a perfect design.

Almost all buyers found that the mountain will give you better results. Further, they also found that the mount is easy to connect to the female end. In addition, a few say that this plug is designed to be plugged into a female plug that matches, plus you should have a # 8 gage wire to handle the current that your trolling motor draws. In conclusion, buyers found this to be one of the best mountains for daily purposes.

• This is a perfect fit, is very nice, it is very bright and has a great design.
• Advanced design ensures both easy installation and all-weather dependability.
• This is not compatible with the motorguide 2-wire power receptacle.
• This is designed for 12 volts only.

Best For Good Quality: Newport Vessels Trolling Motor Side Mount

Buy on Amazon

The Newport Vessels Trolling Motor Side Mount's high-end materials make sure that it ages well with use. The newport vessels trolling motor side mount comes with product dimensions, is great for external battery ports, It is easy to transport and has a great design. Safely and easily connect your trolling motor or accessory to the battery ports without opening the box. Further, the mount is great with good service, is great for small boat, It is great for superior quality and has a perfect design.

The mount includes one usb charger (5v - 0.5amp) and one 12v accessory port for charging of accessories. Above all, the newport vessels trolling motor side mount features a test button and two waterproof circuit breakers for both the main 60 amp trolling motor terminals and the 10 amp boat accessory power ports.

Almost all buyers agree that the mount has real people on the phone. Further, they say that the mount is as noce as they say, but the box does require a lot of headroom. Further, a few strongly agree that the mount is one that followed the recommended specs.

• This fits the most common batteries groups 24 and 27.
• This is a reasonably priced alternative.
• The external battery posts work as an extension of the battery terminals.
• Non-slip rubber feetnon-slip feet inserts enable your batter box to stay in its place.

Best With Electric Trolling Motor: Minn Kota Trolling Motor Side Mount

Buy on Amazon

Next on the list, we've got yet another mount that manages to win our hearts. It's the Minn Kota Trolling Motor Side Mount and it's widely considered as one of the most convenient mounts you can buy. The minn kota trolling motor side mount is a direct replacement for the mka-16. Make sure this fits by entering your model number. Further, it is compatible with a power drive, is very sturdy, it comes with a bottom plate and has a great design.

The mount is compatible with ultra, it is compatible with ulterra and has a nice design. Most importantly, the minn kota trolling motor side mount provides a quiet and secure locking system.

Most customers opine that the mount comes with pre-drilled holes for the newer motors. And, they strongly agree that the mountain is a universal bracket for minn kota. In addition, a few also found that the plate was mounted to the boat, and the trolling motor slidden into the plate. To sum up, buyers found this to be one of the best mount for daily purposes.

• This worked perfectly. It is compatible with a power drive pontoon and has a good design.
• This will corrode over a short time.
• This is designed for use in freshwater.
• This can be used with almost any of the minnkota bow mount motors.

Best For Aluminum Boat: Pro Controll Trolling Motor Side Mount

Buy on Amazon

The pro control trolling motor side mount's material feels more premium than its price would suggest. The pro control trolling motorside mount measures 9.5” l x 6.75” w x 9” h and weighs 6 lbs. Make sure this fits by entering your model number. The procontroll ez mount system is designed to outlast the trolling motor.

Lastly, the pro control trolling motor side mount has a quick release clamp, 1% draft on the mount so the trollingmotor won’t slide, large ergonomic knobs for ease of mounting, and fiberglass reinforced nylon along with stainless steel hardware for strength and long-lasting durability.

Almost all customers agree that the mount does not need a perfectly flat surface to clamp onto the side of the boat. In addition, a few also found that the mount is built to support electric trolling motors. In addition, they also found that this trolling motor mount mounts to the boat 's side or bow, making it easy to install and use. Overall, for almost all buyers, the mountain was what they were looking for.

• The mount is well made and works great for side slabbing crappie.
• This does the job, It fits well and has a nice design.
• The diameter of the actual shaft or Why does it matter ?.
• Quick & easy installation on a 3" wide or less gunwale or top rail.

Best For Small Footprint: Watersnake Trolling Motor Side Mount

Buy on Amazon

The best part: Watersnake Trolling Motor Side Mount costs comparatively little and it is available to ship in 24 hours. The watersnake trolling motor sidemount is good for more fishing, It works well for the control panel and has a simple design. The manufacturer says: You’ll see our motors attached to the bows of tournament bass boats, mounted on family fishing boats, locked onto the transoms of the traditional tinny and even powering modern kayaks and canoes. This freshwater electric bow mount trolling motor for boats featuring a 54.

The mount makes for easy tilt, it allows for plenty of power and has a motor style. In addition, this is highly recommend, it works well and has an ergonomic design. Lastly, the watersnake trolling motor side mount could be made better, more accessible, and tough enough to handle the harshest fishing environments.

Almost all customers agree that the mount fits in the pescador pilot 12 hole. Furthermore, a few also found that the mount fits through hobie mirage drive well w/o any tilting etc. In addition, a few say that this listing showed the unit with the kayak bracket. In conclusion, at the price, they believe that they got a steal of a deal with it.

• The watersnake asp t18s requires a 12v battery in order to operate.
• The watersnake 24 " shaft length is perfect for native slayers who propel 10.
• The three-blade weedless propeller design keeps you moving quietly through the water.
• This is 12volt, 9-20 amps and salt water rated.

Best With Gps: Haswing Trolling Motor Side Mount

Buy on Amazon

We would, of course, be remiss if we didn't mention Haswing Trolling Motor Side Mount for regular usage. The haswing trolling motor side mount, suitable for fresh water, is very nice and it is perfect for open water. And the stow and deploy pedal can be depressed with a single hand or foot and makes transitioning between in the water and on the boat quickly, so you can save more strength to reel in the big ones. In addition, the mount runs smooth and it is highly recommend.

The mount is great for customer service and it works perfectly. Above all, the haswing trolling motorside mount is suitable for boats weighing up to 2750lbs.

Almost all customers agree that the mount features... especially for the price. Moreover, a few also found that the mount does hang over so far, the install could be affected by the minimal space between the top of the bow and the hull coming together. Further, they strongly agree that this link is the trolling motor with remote control, foot control and quick release bracket. Overall, for most customers, Haswing product was just what they wanted.

• This can be used on the water and installed on a boat a couple of days ago.
• This includes everything you need and it is not a cable steering foot pedal.
• This is easy to use with the remote or the pedal.
• Uick release bracket can help you to install/remove the motor easily.

Best For Easy Recharge: Aquos Trolling Motor Side Mount

Buy on Amazon

The Aquos Trolling Motor Side Mount's material feels more premium than its price would suggest. The aquos trollingmotor side mount allows for easy recharge, is made for quick delivery, It has a great remote and has a great design. Make sure this fits by entering your model number. In addition, it is easy to store, it is great for customer service and has a simple design. Finally, the aquos trolling motor side mount is suitable for g ps model trolling motor.

Almost all customers agree that the mount works well and comes with several different ways to hold onto, neck, wrist, belt, pocket etc. Also, they say that the mount is used for Cayman b bow mount trolling motor and Cayman t transom trolling motor, The series number of the motor are 50700, 50718d and 50706. In short, most customers call the mount is functionally comfort, and no one questions it.

• Easy to carry, usb charging, control.
• Connect the machine according to the manual, then you can use it.
• Good brand reputation.

Best For Heavy Duty: Wilderness Systems Trolling Motor Side Mount

Buy on Amazon

The Wilderness Systems Trolling Motor Side Mount's high-end materials makes sure that it ages well with use. The wilderness systems trolling motor sidemount can be paired with wilderness systems stern mounting plates to accommodate the radar and atak models. The wilderness systems universal trolling motor mount allows you to easily install a clamp-on style trolling motor with up to 3 h.p. This kit does not come “ ready to install. ” some daily installation will be required.

Lastly, the wilderness systems trolling motor side mount allows (not included).boat compatibilityany boat with a flat spot on the stern big enough for a power pole.

Most buyers opine that the mount is easy to cut using basic wood tools. Further, a few strongly agree that the mount is made from 1/4" marine board or 1/8" metal. In addition, they say that the mount is used to make adjustments if needed.

• This is designed for mounting trolling motors.
• Bracket dimensions: (l) 8.59” x (w) 8.78” x (h) 3.95”.
• This allows for a great fit, has a mounting location, it works well and has a motor style.
• Recommended for trolling motors with up to 3 horsepower and/or 70 pounds of thrust.

Best With Remote Control: Brocraft Trolling Motor Side Mount

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate mount. The Brocraft Trolling Motor Side Mount is exactly that - it's a simple mount that hits all the right notes. The brocraft trolling motor side mount includes a two - year warranty and also can be adapted to fit either side of the kayak. Fabricate an aluminum motor mount with a super strong, two - side nylon material protection motor clamp. Moreover, the mount looks good, it gets the job done and has a perfect design.

Finally, the brocraft trolling motor side mount can live with overall built quality and has a good design.

Most customers opine that the mount is only rated for 35 pounds thrust motors. And, a few strongly agree that the mount is made with great quality, However, the base needs to go back to the drawing board. Moreover, they strongly agree that the bracket, the kayak, and backing plates with strong stainless bolts and nylon lock nuts. Overall, the tone of buyers is very positive and we believe that the mount suits the purpose.

• A standard motor mount allows you to affix a gas or electric motor to any kayak.
• This works with a power drive and has a nice design.
• Two side aluminum bases can fit different angles kayak places.
• These backing plates are very important to hold the whole mount on sturdy.