The 11 Best 601 Ignitor Norton 120 Volt Models (2022 reviews)

Compared with other models in this category, the Supco 601 Ignitor Norton 120 Volt Model has a design with broader appeal. The supco 601 ignitor norton 120 volt model fits perfectly, is inexpensive and it is ready to install. . In addition, this is working great and it keeps on ticking.

The model works great, takes a licking and it is very good. Above all, the supco 601 ignitor norton 120 volt model includes the necessary hardware, instructions (where applicable) and cross reference information for easy installation.

Almost all customers quickly discovered that the model fits all Goodman and Janitrol furnaces from the 1990's to x year. And, a few say that the model is a perfect fit replacement for a German furnace. Also, they strongly agree that the model is easy to replace, mounted with two screws and pluged in a two - wire connector.

Customers also found that its wise to buy a ignitor flame sensor, along with this model.

Top Customer Quotes:

This is good for good quality, works well and it works as advertised.
This works with exact match and it is used for higher resistance to oxidation.
This is a good replacement igniter, easy to install and at a good price.

Best For Gas Furnace: Goodman 601 Ignitor Norton 120 Volt Model

Buy on Amazon

Compared with other models in this category, the Goodman 601 ignitor norton 120 volt model has a convenient design. The Goodman 601 ignitor norton 120 volt model works well for good quality, works perfectly and it fits well. . Also, it fits perfectly and it allows for easy replacement.

Above all, the Goodman 601 ignitor norton 120 volt model worked right away and it is made with fast shipping.

Almost all customers opine that the model is a control circuit board. In addition, they also found that the model would work for this one as well. Also, they strongly agree that this hot surface igniter has to be hot for the pilot / gas valve to open. Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

Few customers got ignitor flame sensor, along with the model.

Why We Like This:

This works as expected and it saves time.
One of the newcomers and featured product.

Best For Great Price: Emerson Rmostats 601 Ignitor Norton 120 Volt Model

Buy on Amazon

Not everyone likes to purchase a model for their daily use, but the Emerson Rmostats 601 Ignitor Norton 120 Volt Model would be an anomoly. The emerson rmostats 601 ignitor norton 120 volt model features 6.125" leads, and 200 degree insulation. Make sure this fits by entering your model number. And, the model is made for quick delivery and it works great.

Lastly, the emerson rmostats 601 ignitor norton 120 volt model comes with the right part and it is designed for a great price.

One customer says - "went out and left her wondering if she was going to have to buy a whole new unit. ". Almost all buyers opine that the model is easy to install with no modifications needed. Therefore, most customers call the model suits best, and no one questions it.

Customers say that buying a ignitor flame sensor, with this model made their life much easier.

Why We Like This:

This works well for direct replacement and it is good for fast delivery.
This is a reliable source of ignition.
One of the newcomers and featured product.

Best For High Quality: Repairwares 601 Ignitor Norton 120 Volt Model

Buy on Amazon

The repairware line of models comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The repairware 601 ignitornorton 120volt model is great for hot surface igniters and it comes with exact part replacement. Find out that's why our product support is rock solid. In addition, this allows certain furnace models to start or heat up.

The model is great with quick shipping, works great and it is good for exact replacement. Lastly, the Repairwares 601 Ignitor Norton 120 Volt Model is suitable for a variety of use cases, brands, and product types.

Almost all customers opine that the model is used for heathing system.ss. In addition, a few say that this part is fully compatible with your model. Consequently, customers were very happy to recommend it to friends and families.

Customers also discovered that its wise to buy a ignitor flame sensor, along with this model.

Top Customer Quotes:

This is good for fast delivery and it comes with excellent service.
This is extremely fragile and sensitive to contamination.
hold the igniter element is extremely fragile.
Note: if the repairwares igniter works, the answer is that it should.

Best For Heater: Ruud 601 Ignitor Norton 120 Volt Model

Buy on Amazon

Next on the list, we've got yet another model that manages to win our hearts. It's the Ruud 601 Ignitor Norton 120 Volt Model and it's widely considered as the model that has the most suitable features. Further, the model is great for brand name, is good for very good item and it is good for country of origin. Make sure this fits by entering your model number. Finally, the ruud 601 ignitor norton120 volt model makes for a great buy and it is very good.

One customer says - "If you can’t, you could call the manufacturer and tell them the model number on your furnace and they can tell you the part number needed. ". Most buyers find that the model is easy to install. However, please note cable length is really an issue. With no doubts, this product passed the test and had very satisfied buyers eager to share their experience.

Customers say that getting a ignitor flame sensor, along with model is useful.

Why We Like This:

This is a genuine oem replacement part.
Delivers what they promise.

Best For Perfect Fit: Robertshaw 601 Ignitor Norton 120 Volt Model

Buy on Amazon

Next on the list, we've got yet another model that manages to win our hearts. It's the Robertshaw 601ignitor norton 120 voltmodel and it's widely considered as the model that has the most suitable features. Make sure this fits by entering your model number. In addition, the model fits perfectly and it is good for your country of origin. To sum up, with a 4.6 rating and more than 680 buyers, the Robertshaw 601 ignitor norton 120 volt model stands as the best choice.

Most buyers agree that the model is easy to change. In addition, a few also found that the model is perfect for a 2006 armstrong pulse gas furnace. Without any doubt, this model passed the test and had very satisfied buyers eager to share their experience.

Why We Like This:

Uses a hot surface igniter replacement for Rheem, York, Armstrong and other models.
Lot of satisfied buyers.

Best For Direct Replacement: Ideasure 601 Ignitor Norton 120 Volt Model

Buy on Amazon

The Ideasure 601 Ignitor Norton 120 Volt Model's material feels more premium than its price would suggest. The ideasure 601 ignitor norton 120 volt model is made from durable and resists wear material, and was well-tested by the manufacturer before shipment. It's a great replacement for Goodman furnace manufacturing 0130f00010 sensor, keeping your home warm and comfortable. And, it includes 2 pack furnace flame sensors.

The model comes with excellent service and it works perfectly. Most importantly, the ideasure 601 ignitornorton 120volt model is made from durable and resists wear material metal rod probe with ceramic end.

"Would definitely recommend to a friend. " - says, one customer. Overall, for most customers, the model was just what they wanted.

Customers found that getting a 601 ignitor norton 120 volt model, with this model made their life much easier.

Why We Like This:

Exact replacement for part # 0130f00010 b1172606 b11726-06, keeps your home warm and comfortable.
This is for German amana furnace, total length of the flame sensor is 3.7 inchs.
This can work for a long time.
This is great for a great price, works well and it is perfect for exact replacement.

Best For Hard Wearing Metals: Luxrilix 601 Ignitor Norton 120 Volt Model

Buy on Amazon

Best part: Luxrilix 601 Ignitor Norton 120 Volt Model costs comparatively little and it is available to ship in 24 hours. In addition, it is designed for hard - wearing metals, made of high quality and it is good for simple installation. The Manufacturer says: The difference between us and our competitors is that we always satisfy your expectations. Finally, the luxury 601ignitor norton120 volt model would be perfect with excellent quality and it is made for good value.

In conclusion, many customers have used the model for more than a few months without any complaints, and it shows no sign of giving up.

Why We Like This:

Simple installation steps help you easily fix your appliances only using household maintenance tools.
Wear work gloves to protect your hands.
The Manufacturer says: you can easily replace damaged sensors by following our installation process.
Length (mounting flange to sensor tip) 2-12", length-sensor offset.

Best For Brand Name: Climatek 601 Ignitor Norton 120 Volt Model

Buy on Amazon

Climatek offers a variety of models for personal choice and yet maintains quality in all the variants. And, this is a brand new climatek furnace ignitor igniter. Make sure this fits by entering your model number. Lastly, the Climatek 601 Ignitor Norton 120 Volt Model is made with the right part and it is great for brand name.

Most buyers quickly discovered that the model was an exact fit for trane xl 2 stage furnace.

Why We Like This:

Delivers what they promise.
Good brand reputation.

Best For Hot Surface Ignitor: Supplying Demand 601 Ignitor Norton 120 Volt Model

Buy on Amazon

The Supplying Demand 601 Ignitor Norton 120 Volt Model's superior materials makes sure that it ages well with use. The supplying demand 601 ignitor norton 120 voltmodel is compatible with your brand may not be compatible with your model. Verifying compatibility with your model prior to purchase can ensure you receive the correct part the first time. Further, this is a single silicone nitride hot surface ignitor measuring approximately 8 x 1.25 x 0.75 inches.

Most importantly, the supplying demand 601 ignitor norton 120 volt model has a specific set of parts for that model.

In short, for most customers, the model was just what they wanted.

Customers also discovered that its wise to buy a ignitor flame sensor, along with this model.

Why We Like This:

This can be used in hvac gas ignition controls.
Most parts are model-specific, meaning those parts fit only certain series of manufactured appliances.
It is important to disconnect your appliance from the power supply before servicing.
Model numbers are often located around the door or control panel.

Best With No Adapters: Improvedhand 601 Ignitor Norton 120 Volt Model

Buy on Amazon

Next on the list, we've got yet another model that manages to win our hearts. It's the Improvedhand 601 Ignitor Norton 120 Volt Model and it's widely considered as one of the most convenient models you can buy. The improvedhand 601 ignitor norton 120 volt model fits with no adapters or wiring changes required. The Manufacturer says: With the aim of providing the best service to customers, we select premium matetials and adopt the best process to ensure the quality of products. This silicon carbide hot surface ignitor replaces most applications in rheem, ruud, and weathering furnaces.

Above all, the improvedhand 601 ignitor norton 120 volt model has replaced part number and it can be trusted for good quality.

Consequently, customers were very happy to recommend it to friends and families.

Customers discovered that getting a ignitor flame sensor, with this model made their life much easier.

Why We Like This:

This is great for direct replacement and it fired right up.
Lot of satisfied buyers.