We consider a ignitor flame sensor to be a worthy investment in the long run. In the following post, we will help you to select the best ignitor flame sensors.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Payne Ignitor Flame Sensor READ REVIEW

Best For Easy Installation: Buy: Supco Ignitor Flame Sensor READ REVIEW

Best For A Furnace: Buy: Seneca River Trading Ignitor Flame Sensor READ REVIEW

Best For Gas Furnace: Buy: Goodman Ignitor Flame Sensor READ REVIEW

Best For Heater: Buy: Part Ignitor Flame Sensor READ REVIEW

Best For Great Price: Buy: Up2Win Ignitor Flame Sensor READ REVIEW

Best For Cleaning These Rods: Buy: Protech Ignitor Flame Sensor READ REVIEW

Best For Brand Name: Buy: Ruud Ignitor Flame Sensor READ REVIEW

Best For Direct Replacement: Buy: Ideasure Ignitor Flame Sensor READ REVIEW

Best For Hard Wearing Metals: Buy: Luxrilix Ignitor Flame Sensor READ REVIEW

Best Overall: Payne Ignitor Flame Sensor

Buy on Amazon

Payne offers a variety of sensors for personal choice and yet maintains quality in all the variants. The Payne Ignitor Flame Sensor works perfectly and can be trusted with good service and it works well. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. And, it comes with quick shipping, is designed for good part and it is very good.

Finally, the payne ignitor flame sensor is perfect for factory replacement and it is made with fast shipping.

Almost all customers quickly discovered that the sensor is an exact match in all ways. In addition, a few strongly agree that the sensor is perfect as expected ...... keep a spare. And, they say that the sensor is precisely the part described. To sum up, for most buyers, Payne product was what they were looking for.

• This measures 61 ohms and also looks like the picture.
• This is a safety issue, they would not replace the igniter.
• This installed the part, It is made for good value and works as designed.
• This is easy to install and works right out of the box.

Best For Easy Installation: Supco Ignitor Flame Sensor

Buy on Amazon

The Supco Ignitor Flame Sensor is satisfactory and appropriate and fits well with your daily use. The supco ignitor flame sensor includes the necessary hardware, instructions (where applicable) and cross reference information for easy installation. . Moreover, the sensor works perfectly and it takes a licking.

Above all, the supco ignitor flame sensor is great for high quality and it is ready to install.

Almost all buyers opine that the sensor is very well packaged, a bit hard to reinstall the mounting screws, but that's machine 's fault. Further, they say that the sensor is a perfect fit replacement for a German furnace. Moreover, a few say that the sensor is easy to replace, mounted with two screws and pluged in the two - wire connector. To sum up, most buyers agree that the sensor suits them best, and no one questions it.

• This is good for fast delivery and it can be adjusted for exact fit.
• This fits all Goodman and Janitrol furnaces from the 1990's to x year.
• This works great and it works well.
• This is a good replacement igniter, easy to install and at a good price.

Best For A Furnace: Seneca River Trading Ignitor Flame Sensor

Buy on Amazon

The Seneca River Trading Ignitor Flame Sensor might be a relatively new release, but it's still nothing short of impressive this year, thanks to multiple price cuts and added new features over the past few months. The Seneca river trading ignitor flame sensor works perfectly. It is good for fast delivery and it works well. Make sure this fits by entering your model number. Further, the sensor is good for direct replacement, is designed for exact replacement, flawless function and it works fine.

Finally, the Seneca river trading ignitor flame sensor can be adjusted for exact fit, works great and it is great for fast shipping.

Most customers agree that the sensor is coated with impurities from the gas over time and stops "sensing" the heat properly. Furthermore, a few also found that the sensor is a fast and simple installation for a low cost. With no doubts, this product passed the test and had very satisfied buyers eager to share their experience.

• This is the exact part needed.
• This is great for a great price and it is warm inside.
• This looks like the right part.
• This is a great replacement for the factory one.

Best For Gas Furnace: Goodman Ignitor Flame Sensor

Buy on Amazon

If you want nothing but a sensor that is suitable, this German ignitor flame sensor is certainly a wise investment. The German ignitor flame sensor works well for good quality, works perfectly and it is made with fast shipping. . In addition, this worked right away and it is perfect for easy replacement. Most importantly, the German ignitorflame sensor works as expected and it fits well.

Most buyers find that the sensor is the correct ignitor for your model number. Moreover, a few also found that the sensor would work for this one as well. Also, a few say that the sensor is the controller circuit board. In short, for most buyers, it was what they were looking for.

• Lot of satisfied buyers.
• Delivers what they promise.

Best For Heater: Part Ignitor Flame Sensor

Buy on Amazon

The Part Ignitor Flame Sensor is the most suitable sensor on the market today. The part ignitor flame sensor is a brand new furnace flame sensor. Make sure this fits by entering your model number. If the flamesensor goes bad, the furnace will light for several seconds and then turn back off the flame sensor.

The sensor works like new, works great and it is great for real good quality. Further, it fits perfectly, works fine and it comes with great part. Lastly, the part ignitor flame sensor fixed the problem and it is working great.

Almost all customers found that the sensor is about 5 cheaper on Amazon than at the plumbing supply store, but it's way more convenient to order a spare on amazon. Further, they also found that the sensor is a bit longer than the original, but the insertion depth is an exact match. And, a few say that the original sensor worked well for three years before it failed to work properly. As a result, customers were eager to recommend it to friends and would-be buyers.

• This is a perfect fit, because it is so inexpensive.
• This operates as an original and it works at a low price.
• Good investment for the long term.

Best For Great Price: Up2Win Ignitor Flame Sensor

Buy on Amazon

Up2Win offers a variety of sensors for personal choice and yet maintains quality in all the variants. The Up2Win Ignitor Flame Sensor is made from durable and resists wear material, and well-tested by the manufacturer before shipment. The Manufacturer says: We make sure to help you choose the correct replacement part(s) and will guide you through every step of the repair for your particular model. Moreover, it is best for exact fit, provides great value and it is great with fast shipping.

Above all, the up2win ignitor flame sensor has a number of replacement parts for appliances, lawn equipment, power tools, and heating & cooling equipment.

Most customers found that the sensor is a great replacement for the factory flame sensor. Further, they also found that the sensor is easy to install and functions perfectly. And, they also found that note: if this is the first time that your flame sensor has stopped working, you can carefully remove it and clean the white calcium build up off the tip by using a rough dry cloth or gently use some fine paper. Overall, most buyers found the sensor suited best, and no one questions it.

• We provide excellent service and please contact us if you have any questions.
• This works like new, comes with excellent service and it works well.
• It is easy to install and works well.
• This has saved money and it is designed for a great price.

Best For Cleaning These Rods: Protech Ignitor Flame Sensor

Buy on Amazon

The Protech Ignitor Flame Sensor's material feels more premium than its price would suggest. The protech ignitorflame sensor is for heavy duty, is best for exact fit and it provides great value. Make sure this fits by entering your model number. Further, it works great, saves money, it is made with fast shipping and works as designed. Lastly, the protech ignitor flamesensor works as intended and it works as stated.

Most customers agree that the sensor is perfect for cleaning these rods. Further, a few strongly agree that the sensor is an inexpensive direct spark ignitor for ruud and rheem furnaces. Moreover, a few also found that the sensor has a wide prong that ignites a furnace, usually a ruud 90 plus achiever furnace, which also has a large grommet on the wires. Consequently, customers were very happy to recommend it to friends and families.

• The ignitor has 2 rods close together and the sensor is one rod.
• This fits the classic 90 plus.
• One of the newcomers and featured product.

Best For Brand Name: Ruud Ignitor Flame Sensor

Buy on Amazon

Ruud offers a variety of sensors for personal choice and yet maintains quality in all the variants. Make sure this fits by entering your model number. Moreover, the sensor is good for country of origin, is great for brand names and it is very good. In conclusion, with a 4.6 rating and more than 1144 buyers, the Ruud Ignitor Flame Sensor stands as the best choice.

One customer says - "If you can’t, you could call the manufacturer and tell them the model number on your furnace and they can tell you the part number needed. ". Almost all buyers opine that the sensor is easy to install. However, please note cable length is really an issue.

• This is a genuine oem replacement part.
• Good brand reputation.

Best For Direct Replacement: Ideasure Ignitor Flame Sensor

Buy on Amazon

Next on the list, we've got yet another sensor that manages to win our hearts. It's the Ideasure Ignitor Flame Sensor and it's widely considered as one of the most convenient sensors you can buy. The ideasure ignitor flame sensor is great for a great price and it works perfectly. It's a great replacement for Goodman furnace manufacturing 0130f00010 sensor, keeping your home warm and comfortable. Moreover, the sensor is made from a durable and resists wear material metal rod probe with a ceramic end.

The sensor comes with excellent service and it works great. Finally, the ideasure ignitor flame sensor works well for direct replacement and it works well.

"If not, you can google for German furnace part and enter the information there and get the ignitor for your model. " - says, one customer. Overall, at the price, they believe that they got a steal of a deal with it.

• This can work for a long time.
• This is for German amana furnace, total length of the flame sensor is 3.7 inchs.
• This includes 2 pack furnace flame sensors.
• Exact replacement for part # 0130f00010 b1172606 b11726-06, keeps your home warm and comfortable.

Best For Hard Wearing Metals: Luxrilix Ignitor Flame Sensor

Buy on Amazon

Compared with other sensors in this category, the Luxrilix Ignitor Flame Sensor has a convenient design. And, the sensor is best for high quality and it is made of high quality. The Manufacturer says: We will uphold the spirit of professional and pursue the first-class quality of products, provide premium quality products to men all over the world. Most importantly, the luxury ignitor flame sensor would be perfect with excellent quality and it can be bought for good value.

Overall, buyers found this to be one of the best sensors for daily purposes.

• Wear work gloves to protect your hands.
• The Manufacturer says: you can easily replace damaged sensors by following our installation process.
• Length (mounting flange to sensor tip) 2-12", length-sensor offset.
• Simple installation steps help you easily fix your appliances only using household maintenance tools.